Résine-Net

Biobased epoxy laminating resin from Entropy, transparent and UV resistant, high performance Specifically designed for coatings and marine applications. Its viscosity is ideal for hand lay-up techniques with fast hardener. - Frequent uses: - Surfboards, Stand Up Paddle Boards and Handplanes - Fiberglass composites, carbon fiber composites, natural fiber composites - Clear coatings - Fiberglass boat repair - Adhesives and sealants - Compatible with coloured substrates - Semi-thick viscosity: Ideal for hand lay-up techniques - Slow, Fast, or Extra Fast hardener: Adjust working time according to your project - Eco-friendly: 29% biobased content Choice of hardener: Extra Fast CLX Fast CLR Slow CLS Touch dry (at 25°C) 2 hours 4 hours 8 hours Full cure time 7 days at 25°C 7 days at 25°C 7 days at 25°C A high performance, transparent, biobased epoxy resin for general purpose and UV resistance. Allows for coatings, marine applications and is compatible with coloured substrates. Its viscosity is ideal for hand lay-up techniques with fast curing. Typical uses: Fiberglass composites, carbon fiber composites, natural fiber composites, clear coatings, fiberglass boat repair, adhesives and sealants, surfboards, Stand Up Paddle Boards and Handplanes Super Sap® formulation 29% biobased content USDA BioPreferred certified

PUFLOORING, two-component self-smoothing polyurethane resin. - Designed for the protection and finishing of new and old floors. - Main uses: ideal for garages, showrooms, laboratories, living spaces, balconies, and industrial floors. - Advantages: easy to maintain, continuous coating, joint-free and shrinkage-free, UV resistance, wear resistance, abrasion resistance, acid resistance... - Colours: beige, blue, light grey, dark grey, yellow, and green. - Packaging: kit of 5 kg, 10 kg, 15 kg, and 20 kg. Training on the use of polyurethanes: https://www.safeusediisocyanates.eu/fr/Two-component, self-smoothing polyurethane resin for the protection and finishing of new and old floors. Shrinkage-free, waterproof, applies over our PoxyFirst primer. Good resistance to UV, wear, abrasion and acids...

Rouleau débulleur pour enlever les bulles d'air de votre résine. Spiked roller to remove air bubbles from your resin.

Notched spatula for rapid application of thickened epoxy on large surfaces. The thin, straight edge is ideal for applying layers of reinforcing fabrics. Used to laminate large panels. Sold in packs of 36 spatulas 110x110mm

West System flexible plastic coating squeegees. Lightweight and reusable for profiling and filling. Double sided, 90x 150mm. Sold by 12. Associated products: - disposable gloves. ref: WS832-50

West system cleaning solvent 1 litre Cleaning solvent specially designed to remove uncured epoxy residues from tools, substrates and in the workshop. Also excellent for removing contamination from cured epoxy surfaces. Recommended equipment: - Disposable gloves. Ref: WS832-50 - Graduated mixing jar. Ref: WS805 - Reusable mixing sticks. Ref: WS804-25

Epoxy amine cleaning solution Designed to remove uncured epoxy from tools, workbenches, mini-pumps, etc. Can also be used to clean amine traces from cured epoxy. Safe and easy to use. Recommended equipment: - Disposable gloves. Ref: WS832-50 - Graduated mixing jar. Ref: WS805 - Reusable mixing sticks. Ref: WS804-25

West system cleaning solvent 2.5L Cleaning solvent specially designed to remove uncured epoxy residues from tools, substrates and in the workshop. Also excellent for removing contamination from cured epoxy surfaces. Recommended equipment: - Disposable gloves. Ref: WS832-50 - Graduated mixing jar. Ref: WS805 - Reusable mixing sticks. Ref: WS804-25

Epoxy amine cleaning solution Designed to remove uncured epoxy from tools, workbenches, mini-pumps, etc. Can also be used to clean amine traces from cured epoxy. Safe and easy to use. Recommended equipment: - Disposable gloves. Ref: WS832-50 - Graduated mixing jar. Ref: WS805 - Reusable mixing sticks. Ref: WS804-25

Epoxy infusion resin : INF-114 Designed for the manufacture of lightweight and high-performance composites Viscosity : very low for better penetration and adhesion Packaging : 5kg, 25kg, 225kg, 1000kg Wide range of hardeners : fast (210), medium (211), slow (212) and super-slow (213) curing Outstanding mechanical properties Long-term resistance

- Hardeners : fast curing (210), medium curing (211), slow curing (211), super slow curing (213) - Packaging : 1.37 kg, 6.86 kg, 61.65 kg and 274 kg - Designed for INF-114 epoxy infusion resin - Very low viscosity : guarantees optimum adhesion and penetration - Long-term cyclic load resistance - High thermal performance

The white liquid dye 501 is an epoxy-based dye used to tint the epoxy mixture white, providing a uniform white colour base. A 4 fl oz bottle will tint approximately 1.5 gal of epoxy. We suggest using very small amounts of pigment, about 5% by weight.

Liquid epoxy colourant used to tint the epoxy mixture black, providing a uniform black colour base. One 4 fl oz bottle will tint approximately 1.5 gal of epoxy. We suggest using very small amounts of pigment, about 5% by weight.

The grey liquid dye 503 is an epoxy-based dye used to tint the epoxy mixture grey, providing a uniform white colour base. A 4 fl oz bottle will tint approximately 1.5 gal of epoxy. We suggest using very small amounts of pigment, about 5% by weight.

The blue 505 liquid dye is an epoxy-based dye used to tint the epoxy mixture white, providing a uniform white colour base. A 4 fl oz bottle will tint approximately 1.5 gal of epoxy. We suggest using very small amounts of pigment, about 5% by weight.

- ADV-170 Epoxy Adhesive Resin and ADV-270 Hardener - Application: various types of bonding (wood, aluminium, iron, steel and more) - Consistency: pre-thickened for vertical applications - Mechanical properties: high compressive, flexural and tensile strength

The ONE KIT includes Entropy Resins' ONE Epoxy Resin Hardener ONS (Slow) or ONF (Fast), designed for general laminating, coating and bonding applications. - Environmentally friendly: 30% biobased, USDA BioPreferred certified. - Versatility: Suitable for a wide range of applications. - Low viscosity and debubblization: bubble-free, smooth results. Choice of hardener: Fast ONF Slow ONS Dry to the touch (at 25°C) 3 hours 8 hours Full cure time 7 days at 25° 7 days at 25°C

Pre-thickened bi-component epoxy adhesive for waterproof bonding of various materials To be combined with G/Flex 655 resin Packaging: 4000 ml of hardener Plastic Bonding Demonstration (in English)

Pre-thickened bi-component epoxy adhesive for waterproof bonding of various materials Packaging: 4000 ml of resin Plastic Bonding Demonstration (in English)

50ml reusable dosing syringe kit for resin and 10ml for hardener West SystemReusable syringes ideal for bonding equipment and repairing plywood.