Résine-Net

Connector for high temperature BSP vacuum

Polyethylene vacuum infusion inlet block. 16mm diameter x 35mm high. Maximum use: 100°c

Woven carbon fiber tape: a light and ultra resistant material for the repair and reinforcement of your structures.232g/m² - 5cm wide X 5m long (0,25m²)

Two-component epoxy that sets quickly in 3 to 5 minutes. Ideal for quick repairs around the house, manual work and more! Its viscosity allows it to penetrate porous surfaces. Adheres to most surfaces: wood, ceramic, metal, leather, plaster, stone, fiberglass, glass, cork, plastic, paper... The G/5 can be wet occasionally but is not intended to be continuously wet or damp. >> Demonstration of repair (article in English)

L'EquiProtect is an anti-slip system based on a three-component polyurethane resin. Common uses: - Protection of new or old livestock floors for the transport of shod or unshod animals - Ideal for horse trucks Key benefits: Improve comfort, enhance safety, provide a durable coating, etc. Packaging available: - 14 kg kit: Mix of 8.5 kg (resin + hardener) + 5.5 kg of rubber granules - 28 kg kit: Mix of 17 kg (resin + hardener) + 11 kg of rubber granules

Bio-based transparent casting, moulding and inlay epoxy resin CCR Usage: jewellery, thick coatings, castings and other projects. Transparency: guarantees exceptional clarity. Low viscosity: facilitates moulding, casting and degassing for a smooth, bubble-free finish. UV resistance: CCR epoxy protects creations from yellowing. Suitable hardeners: choice between slow or fast hardener depending on the project. Eco-friendly: 30% bio-based content. Fast Hardener CCF Slow Hardener CCS Curing time 24 hours 72 hours Casting thickness - 2cm +2cm (see technical data sheet) CCF fast hardener for ENTROPY's CCR biobased epoxy casting and moulding resin. Designed for casting, inlay and coating applications in high thickness (62mm with the fast hardener and 100mm with the slow hardener) Frequent use: jewellery, thick coating and casting. Super Sap® formulation. 30% biobased content USDA BioPreferred Certified

Bio-based transparent casting, molding, and inlay epoxy resin CCR Applications: jewellery, river tables, and more. Transparency: ensures exceptional clarity. Low viscosity: allows for moulding, casting, and degassing for a smooth, bubble-free finish. UV protection: CCR epoxy protects creations from yellowing. Suitable hardeners: choice between slow or fast hardener depending on the project. Eco-friendly: 30% bio-based content Fast Hardener CCF Slow Hardener CCS Curing time 24 hours 72 hours Pouring thickness - 2cm +2cm (see technical data sheet) CCS slow hardener for ENTROPY's CCR biobased casting and molding resin. Designed for casting, inlay and coating applications in high thickness (62mm with the fast hardener and 100mm with the slow hardener) Frequent use: jewellery, thick coating and casting. Super Sap® formulation. 30% biobased content USDA BioPreferred Certified

Durcisseur CLS (Slow), CLF (Fast) or CLX (Extra Fast) for BRT/CLR epoxy resin from Entropy Resins, designed for the lamination and hot coating of surfboards, paddleboards, and other sliding sports. - Areas of application: surfboards, paddleboards, coating... - Suitable hardeners: choice between slow, fast, or extra fast hardener depending on the project. - UV protection: UV resistant and low yellowing - Eco-friendly: 30% bio-based, USDA BioPreferred certified. white or low colour standing. Choice of hardener: Extra Fast CLX Fast CLR Slow CLS Touch dry (at 25°C) 2 hours 4 hours 8 hours Full curing time 7 days at 25° 7 days at 25° 7 days at 25°C ENTROPY optical grade biobased epoxy resin providing UV resistance for white or low colour standing surfboard or paddleboard applications.

Optical grade ENTROPY biobased epoxy resin providing UV resistance for white or low color standing surfboard or paddleboard applications.

Extra fast clear epoxy hardener CLX to be combined with CLR clear laminating resin or BRT high gloss optical quality resin. With their low viscosity, excellent UV stability and multiple choice of hardeners, these epoxy resins are ideal for composites, coatings and adhesives. Common uses: Fiberglass composites, carbon fiber composites, natural fiber composites, clear coatings, fiberglass boat repair, adhesives and sealants, surfboards, Stand Up Paddle Boards and Handplanes Super Sap® formulation. 30% biobased content USDA BioPreferred certified

Biobased epoxy resin with high content of bio-components for lamination, composite applications, coating and adhesives Fast curing, low viscosity and fast air release property. Common uses: Fiberglass composites, natural fiber composites, woodworking, epoxy coatings, fiberglass boat repair, adhesives and sealants, surfboards, Stand Up Paddle Boards and Handplanes Super Sap® formulation. 30% biobased content USDA BioPreferred Certified

ONS (Slow) or ONF (Fast) hardener for ONE epoxy resin from Entropy Resins, designed for general laminating, coating and bonding applications. - Environmentally friendly: 30% biobased, USDA BioPreferred certified. - Versatility: Suitable for a wide range of applications. - Low viscosity and debubblization: bubble-free, smooth results. Choice of hardener: Fast ONF Slow ONS Dry to the touch (at 25°C) 3 hours 8 hours Full cure time 7 days at 25° 7 days at 25°C

Entropy's BRT biobased epoxy laminating resin with crystal clear, glossy optical quality. Specially designed for the lamination and hot coating of white or low color surfboards, paddle boards and other board sports. - Areas of application: Surfboards, paddle, coating... - Suitable hardeners: Choice between slow, fast, or extra fast hardener depending on the project. - UV protection: UV resistant and low yellowing. - Eco-friendly: 30% biobased, USDA BioPreferred certified. Hardeners available: Extra Fast CLX Fast CLR Slow CLS Touch dry (at 25°C) 2 hours 4 hours 8 hours Full curing time 7 days at 25°C 7 days at 25°C 7 days at 25°C Entropy's BRT biobased epoxy laminating resin with crystal clear, glossy optical quality. Specially designed for the lamination and hot coating of white or low color surfboards, paddle boards and other board sports. Derived from ENTROPY CLR Common uses: White surfboards, Paddle Super Sap® formulation. 30% biobased content Certified USDA BioPreferred

Bio-based crystal clear epoxy resin for casting, moulding, and inlaying CCR Applications: jewellery, river tables, and other projects. Crystal clarity: ensures exceptional transparency. Low viscosity: facilitates moulding, casting, and degassing for a flawless finish. UV resistance: CCR epoxy protects creations from yellowing. Choice of hardeners: adjust working time according to the project (Slow or Fast) Eco-friendly: 30% bio-based content Fast Hardener CCF Slow Hardener CCS Curing time 24 hours 72 hours Pouring thickness - 2cm +2cm (see technical data sheet) Biobased, low viscosity, UV resistant, crystal clear resin designed for casting, inlaying and coating applications in high thickness (62mm with fast hardener and 100mm with slow hardener)

CPS (Slow) or CPF (Fast) hardener for Entropy Resins 305 epoxy resin, designed for high-temperature compression molding processes. Applications : Snowboards, Skateboards, Skis, Wood laminates, Compression molding composites... - Environmentally friendly : 28% biobased, USDA BioPreferred certified. - High thermal and mechanical resistance. - Low viscosity : Facilitates fiber impregnation and reduces sagging. Hardener : Fast CPF Slow CPS Working hours 20 minutes at 25°C 50 minutes at 25°C Curing time 15 minutes at 82°C 20 minutes at 82°C

Epoxy resin 305 from Entropy Resins, designed for high-temperature compression moulding processes. Common uses: Skis, Snowboards, Skateboards, Compression moulding composites, Wood laminates... - Eco-friendly: 28% bio-based, USDA BioPreferred certified. - High thermal and mechanical resistance. - Low viscosity: Facilitates fibre wetting and reduces sagging. Hardener: Fast CPF Slow CPS Working time 20 minutes at 25°C 50 minutes at 25°C Curing time 15 minutes at 82°C 20 minutes at 82°C Biobased epoxy resin for compression moulding processes for fast cycling Rapid heat activated polymerisation for high temperature compression moulding processes. Common uses: Skis and Snowboards, Skateboards, Compression moulding composites, Wood laminates. Super Sap® formulation. 28% biobased content USDA BioPreferred® certified