Résine-Net
Resine-net specializes in providing high-quality epoxy resins, adhesives, and composite materials tailored for the yachting industry. Their extensive product range includes epoxy resins for lamination and infusion, structural adhesives, fillers, additives, and vacuum infusion consumables. These products are designed to meet the rigorous demands of yacht construction and maintenance, ensuring durability and superior performance. Resine-net is a trusted partner for yacht builders and owners seeking reliable materials for their maritime projects.
Drainage Filet Slow Flow. Promotes the Impregnation of Fabrics. Guides and Brings the Resin Across the Entire Surface.
Black slow-flow draining net in 3D PE mesh density 160g/m² 120°c 200cm wide
€5.63
Breathable PET Fabric. To Evacuate Air From a Laminate Before and During Curing. Max: 210°C. 150G/M². Width: 152CM
Breathable fabric used to evacuate air from a laminate before and during curing. Maximum use: up to 210°c 150G/m² weight Width: 152cm Sold by 5 meters minimum
€5.74
Breathable PET Fabric. Evacuates All Gases Produced During the Curing Cycle. Max: 210°C. 300G/M². Width: 152CM
Tissue breathable used to evacuate air from a laminate before and during curing. Its most common use is for prepregs in the demoulding and curing stages. Used to: - evacuate air between plies as the laminate thickness increases - evacuate any gas produced during the curing cycle - absorb resin by hand/wet lamination sold by 5 metres minimum
€8.30
Silicone Adhesive Teflon Sheet Used for Demoulding. Width: 1000MM. Max Usage: Up To 320°C
Teflon coated glass fabric used for demolding. Non-developable. Adheres to metal as well as wooden molds. Stable during curing and autoclave. Recommended for use on flat or single curved surfaces. Can be assembled with a butt joint. Width 1000mm. Sold by the metre. Maximum temperature: up to 320°c.
€74.14
Separator Film (P31) Slow-Draining for Vacuum Infusion. RE-MESH. Max: 120-125°C. PRO-VAC
RE-MESH is a slow draining separator film (P31) used for vacuum infusion. Composed of a polyolefin separation film PRO-VAC 500 P31 and a blue sheet PROVAC KM160B 150g/m². Saves time in setting up the infusion. Less glue needed to hold in place. Easier to handle, to cut and to place in the mould. Width: 1450mm Maximum use: 120-125°C
€8.42
Polyethylene Pipe for Resin Infusion. Diameter of 10MM. Operating Temperature: 100°C
Polyethylene hose for resin infusion
Diameter: 10mm
Thickness: 1 mm
Maximum temperature: 100°C
Sold by 5ml
Diameter: 10mm
Thickness: 1 mm
Maximum temperature: 100°C
Sold by 5ml
€1.10
Polyethylene Pipe for Resin Infusion. Diameter of 12MM. Operating Temperature: 100°C
Polyethylene pipe for resin infusion
Diameter: 12mm
Thickness: 1 mm
Maximum temperature: 100°C
Sold by 5ml
Diameter: 12mm
Thickness: 1 mm
Maximum temperature: 100°C
Sold by 5ml
€1.10
Valve for Infusion
€1.25
L-Shaped Connector for Input Block
L-shaped connector for polyethylene input blocks
diameter 12mm
up to 100°c
To be used with the polyethylene infusion inlet block (REF: PRO46261)
diameter 12mm
up to 100°c
To be used with the polyethylene infusion inlet block (REF: PRO46261)
€1.00
L Connector for Polyethylene Entry Block
L-connector for polyethylene inlet block diameter 18mm maximum temperature of use of the connector up to 100°c To be used with the polyethylene infusion inlet block (REF: PRO46261)
€1.02
BSP Vacuum Plug
€8.77
