Résine-Net

- LAM-125 : Low-viscosity epoxy laminating resin & LAM-135 : Medium-viscosity epoxy laminating resin - Packaging : 1kg, 5kg, 25kg, 225kg and 1000kg - Available hardeners : fast (210), medium (211), slow (211), super-slow (213) curing - Ability to adhere to a wide range of materials (wood, metal, etc.) - Excellent moisture resistance, - Superior resistance to heat and wear - For an ecological alternative, discover our biosourced epoxy laminating resin : LAM-125G

Mastic d’étanchéité autocollant couleur blanc/crème pour haute température (150°C) Specially designed for high temperature oven and autoclave processing Compatible with most vacuum bagging films Will not stain your substrate Thickness 3mm x12mm x15ml

Separation (or release) film that is used between the tear away fabric and the net to limit the rise of resin. Allows for easier mold release. Designed for high temperature curing of advanced composite materials Compatible with a wide range of resin systems commonly used in oven and autoclave. 15 microns Maximum use: 230°c 130cm width sold by 5ml

Product used for the dilution of certain polyurethane resins.

PROTECVARNISH: glossy polyurethane varnish and single-component. Usable indoors and outdoors. - Applications: protects and enhances wood and cement surfaces. - Advantages: resistant to wear, abrasion, and moisture. It penetrates deeply to ensure optimal consolidation. - Packaging: 0.5 kg and 1 kg. Training on the use of polyurethanes: https://www.safeusediisocyanates.eu/fr/Varnishgloss is a one-component gloss coating with good UV and wear resistance. It can be applied both indoors and outdoors.

Small, practical distribution format Ideal repair kit for cracks and small holes in canoes, kayaks and other small plastic boats Perfect for domestic use: DIY, car repairs, etc. Packaging: - 12.5 ml of resin - 12.5 ml of hardener Available in different pack sizes For professionals: to request a discount on West System products, please contact us for a quotation.

High-performance two-component epoxy adhesive Adhesive application: (273, 275, 277) designed for secondary bonding of a wide variety of materials (steel, aluminium, concrete, stone...) Reinforced adhesive application (276): offers superior bonding strength for difficult-to-bond substrates (plastics, pre-impregnated...) Types of hardeners: fast (273), medium (275), slow (277), reinforced (276) 1 mixing nozzle is included in each ADV Consistency: thixotropic, ideal for filling vertical surfaces without the risk of dripping Mechanical properties: solid resistance to compression, bending, and tensile strength Pro-Set epoxy adhesives are high performance, pre-thickened, two component epoxy adhesives for secondary bonding of laminates, steel, aluminium, cast iron, concrete, stone and most types of wood. Adhesives based on PRO-SET 175 resin combined with 275 medium hardener. Colour black.

Choose the resin to suit your needs ADV-176/276 resin : super-reinforced adhesive, medium cure ADV-177/272 resin : super-strength adhesive, fast-curing Color : Black (BK), or Colorless (NC) Application : designed for difficult-to-bond materials, offers high adhesion and mechanical strength Packaging : 400ml Consistency : pre-thickened A mixing cannula is included with the purchase of each ADV

- Attaches to ADV Pro-Set double adhesive cartridges - Ensures precise mixing of resin and hardener in exact proportions - Carefully mixes components as you go - Convenient, clean dispensing

- Designed for ADV Pro-Set cartridges - Enables fast, clean and precise adhesive application - Trigger ratio: 26:1, ideal for high-viscosity adhesives - Die-cast aluminum handle and trigger for comfortable use

Thinner specifically formulated for UltraCoat 630 and UltraPrimer 105

Two-component epoxy primer Ideal for mastics and very thick epoxy undercoats Adheres to all types of substrate: aluminium, steel, stainless steel, fibreglass and wood Excellent results on surfaces exposed to extreme conditions Anti-corrosion pigments guarantee the ability to prevent corrosion

Super-lightweight two-component epoxy coating for high thicknesses Enables high thicknesses to be obtained for each layer of product applied Excellent spreadability, flexible, solvent-free, no shrinkage, no sagging during curing, strong adhesion Can be used on any type of substrate (steel, aluminium, composite materials or wood)

Two-component epoxy topcoat Can be used on all types of substrate (steel, aluminium, composites or wood) Complementary finish for surfaces already treated with thick epoxy fillers Solvent-free, smooth finish, no shrinkage, easy to sand

Two-component epoxy primer / undercoat
Adheres to all types of substrate: aluminium, steel, stainless steel, fibreglass and wood
Ideal primer for various paint cycles and anti-osmosis treatments
Ideal intermediate layer between the epoxy base cycle (UltraPrimer 105 and epoxy fillers) and the finishing cycle

Static mixing cannulas for Six10 cartridge Allows a correct dosage Packaging: pack of 10 units For professionals, for all requests for discounted prices on West System products, please contact us to obtain your quote.

1 pinceaux pour stratifiés
Largeur 50 mm1 laminate brushes
Width 50 mm

ONE epoxy resin from Entropy Resins : General-purpose resin Applications : Wood, General laminating, Bonding, Coating, Manual lay-up... - Environmentally friendly : 30% biobased, USDA BioPreferred certified. - Versatile : Suitable for a wide range of applications. - Low viscosity and debubblization : Uniform application, smooth, air-bubble-free results. Choice of hardener : Fast ONF Slow ONS Dry to the touch (at 25°C) 3 hours 8 hours Full cure time 7 days at 25° 7 days at 25°C

Epoxy adhesive resin ADV-170: transparent colour Versatile and suitable for professionals for various bonding (wood, aluminium, iron, steel...) Hardener: use ADV-170 resin with ADV-270 hardener Consistency: pre-thickened, ideal for vertical/horizontal applications Mechanical properties: solid resistance to compression, bending and tensile strength

Reinforced epoxy adhesive and bio component offering superior resistance Application: designed for difficult-to-bond substrates (pre-impregnated, metals...) Practical dispensing system for precise application Hardener type: medium polymerisation (276) Consistency: pre-thickened for precise application on vertical surfaces Packaging 400ml