• Home /
  • Résine-Net - Bio-Based Transparent Epoxy Resin for Laminating - ER-CLR-1

Résine-Net - Bio-Based Transparent Epoxy Resin for Laminating - ER-CLR-1

Manufacturer: Résine-Net
High-performance bio-based epoxy resin for laminating, UV resistant and eco-friendly.
Manufacturer part number: ER-CLR-1
Vendor: Résine-Net
Availability: Available in 2-4 days
€29.92
i h

Product Description

The CLR from Entropy Resins is a clear, UV-resistant, general-purpose laminating resin suitable for composite lamination, coatings, and adhesive applications.

It has an ideal viscosity for a wide range of applications that use hand lay-up techniques with rapid curing at room temperature.

The CLR is a USDA BioPreferred® certified product with a biobased content of 29%.

Frequent Uses

  • Surfboards
  • Marine
  • Coatings

Consumption

36.6 m² for a 7.25kg kit. Yield may be reduced by 50% on porous substrates or when combined with a fibre reinforcement.

Working Temperature

Optimal temperature of 21°C to 30°C

Working Environment

Prefer low humidity environments

Usage Tips

  • For best results, measure the correct mixing ratio of the two components by weight.
  • Always stir the product thoroughly for at least 2 minutes, scraping all surfaces of the container to ensure a homogeneous mixture.
  • Use the product in a temperature-controlled environment within the optimal limits of the product's use. Avoid cold ambient temperatures or high humidity.
  • For optimum curing performance, ensure that surfaces are dry and free of all dirt, debris, and/or oil. Surface preparation by sanding is strongly recommended.
  • Conduct preliminary tests with the materials and processes being considered to fully understand the curing characteristics of the resin in your working environment and the compatibility of the resin with other materials.

Product Features

  • Excellent clarity
  • UV stability
  • Yellowing resistance
  • Long working time
  • Good for general laminating
  • Adhesive
  • Coating
  • Hand layup
  • Vacuum molding

Available Options

Resin CLR+ Extra Fast Hardener CLXMixing ratio by volume: 2:1Mixing ratio by weight: 100:45Mixing viscosity (cPs at 25°C): 990Time of use (at 25°C): 18 minutesDry to the touch (at 25°C): 2 hoursRecommended complete curing: 7 days at 25°CCharacteristics: flagship product in transparency, UV and yellowing resistance, dry to the touch in minimal timeApplication: professional lamination, coating system, manual layering
Resin CLR+ Fast Hardener CLFMixing ratio by volume: 2:1Mixing ratio by weight: 100:45Mixing viscosity (cPs at 25°C): 1040Time of use (at 25°C): 21 minutesDry to the touch (at 25°C): 4 hoursRecommended complete curing: 7 days at 25°CCharacteristics: excellent transparency, UV resistance, low yellowingApplication: general purpose laminating resin, gluing, coating, hand lay-up, vacuum moulding
Resin CLR+ Slow Hardener CLSMixing ratio by volume: 2:1Mixing ratio by weight: 100:43Mixing viscosity (cPs at 25°C): 700Time of use (at 25°C): 43 minutesDry to the touch (at 25°C): 8 hoursRecommended full cure: 7 days at 25°C (post cure recommended)Characteristics: excellent transparency, UV resistance, low yellowing, long working timeApplication: general purpose laminating resin, bonding, coating, manual layering, vacuum moulding

Video Demonstrations

Video demonstrations on the use of Entropy CLR resin: