Résine-Net

Pre-thickened bi-component epoxy adhesive for waterproof bonding of various materials To be combined with G/Flex 655 resin Packaging: 4000 ml of hardener Plastic Bonding Demonstration (in English)

- Hardeners : fast curing (224), medium curing (226), slow curing (229) - Packaging : 0.286 kg, 1.43 kg, 7.16 kg, 64.35 kg and 286 kg - Designed for epoxy laminating resins LAM-125 & 135 and the biobased version LAM125-G - Material compatibility : wood, metal, all reinforcement fabrics, carbon and kevlar - Wear, moisture and heat resistance - High thermal performance

- Hardeners : fast curing (210), medium curing (211), slow curing (211), super slow curing (213) - Packaging : 1.37 kg, 6.86 kg, 61.65 kg and 274 kg - Designed for INF-114 epoxy infusion resin - Very low viscosity : guarantees optimum adhesion and penetration - Long-term cyclic load resistance - High thermal performance

Steel mixer, specially designed to obtain homogeneous mixes. Technical specifications: Material: Steel Dimensions: Diameter: 120 mm Stem length: 610 mm

Non-reinforced high-temperature silicone PTFE adhesive tape, 25mm wide, 33m long, 260°C

Non-reinforced teflon adhesive tape at high temperature
50mm wide
33m long, 260°C

Crochet à joints pour retirer les joints usés de pont de bateau. S'utilise avant de refaire le calfatage, pour retirer le calfatage / joint ou d'autres matériaux flexibles des rainures. Vous pouvez utiliser la cale à poncer de Teakdecking Systems pour poncer et nettoyer le champs des feuillure avant le calfatage. Joint Hook for removing deck joints. Use before re-caulking to remove caulk or other flexible materials from joints. You can use the Teakdecking Systems seam sander block to remove any residue.

Specially designed to cut or adjust joints precisely. Technical specifications: Holder material: Plastic Holder color: Yellow Blade material: Stainless steel Dimensions: Holder length: 170 mm Blade width: 60 mm

Silicone joint smoothing kit including a spatula (cutter) and its 4 finishing spreaders of different radii and different bevels.

Pack petit modèle WEST SYSTEM Conditionnement : 500g de résine 105, 100g de durcisseur 205 (rapide) Comment doser et mélanger son époxy ? WEST SYSTEM small model pack Packaging: 500g of resin 105, 100g of hardener 205 (fast) How to dose and mix your epoxy?

The 305 kit includes Entropy Resins' 305 resin and CPS (Slow) or CPF (Fast) hardener, designed for high-temperature compression molding processes. Applications: Snowboards, Skateboards, Skis, Wood laminates, Composites for compression molding... - Environmentally friendly: 28% biobased, USDA BioPreferred certified. - High thermal and mechanical resistance. - Low viscosity: optimizes fiber impregnation and reduces sagging. Hardener: Fast CPF Slow CPS Working hours 20 minutes at 25°C 50 minutes at 25°C Curing time 15 minutes at 82°C 20 minutes at 82°C

- ADV-170 Epoxy Adhesive Resin and ADV-270 Hardener - Application: various types of bonding (wood, aluminium, iron, steel and more) - Consistency: pre-thickened for vertical applications - Mechanical properties: high compressive, flexural and tensile strength

KIT BOVIPROTECT, 4-component anti-slip system (resin, hardener, sand + rubber, basalt) ! Warning: not suitable for bakelised type wood floors! - Designed for the protection of new and old livestock vehicle floors. - Improves the comfort of unshod animals - Advantages: anti-slip finish, excellent resistance (wear, excrement, urine, acids...), continuous coating, without joint, no shrinkage, etc. - Colour: green - Packaging: - 20 kg kit - 40 kg kit Training on the use of polyurethanes: https://www.safeusediisocyanates.eu/fr/

BRT Optical Grade Biobased Epoxy Laminating Resin + Hardener Kit This kit is specially designed for hot lamination and coating. Typically used on surfboards, paddleboards, and other white or light-coloured board sports. - Applications: Surfboards, paddleboards, coatings, etc. - Suitable hardeners: Choice of slow, fast, or extra-fast hardeners, depending on the project. - UV protection: UV-resistant and low yellowing properties - Environmentally friendly: 30% biobased, USDA BioPreferred certified. Choice of hardener: Extra Fast CLX Fast CLR Slow CLS Touch dry (at 25°C) 2 hours 4 hours 8 hours Full cure time 7 days at 25°C 7 days at 25°C 7 days at 25°C