Résine-Net

Designed primarily for teak decking joints
Cartridge of 305ml
Polymerisation time: 12 to 15 days before sanding. For approximately 10 linear metres of 5x5mm joint
Available in 592ml pouch
Colours: WHITE (also available in black and grey)
Can be used without primer!

Designed primarily for sealing / caulking teak bridges. Sausage of 592ml. Curing time: 4 to 5 days before sanding. For approximately 20 linear metres of 5x5mm joint. Available in 305ml cartridge. Colour: white, grey or black. Can be used without primer!

Designed primarily for teak decking joints
Sausage of 592ml
Curing time: 12 to 15 days before sanding. For approximately 20 linear metres of 5x5mm joint
Available in 305ml cartridge
Colour: GREY (also available in white and black)
Can be used without primer!

Designed primarily for teak decking joints. 592ml sausage Curing time: 12 to 15 days before sanding. For approximately 20 linear metres of 5x5mm joint Available in 305ml cartridge Colour: WHITE (also available in grey and black) Can be used without primer!

Sky blue metallic pigment 25g jar Note: photos are not contractual. The colour of the pigments may change when mixed with resin.

Black slow-flow draining net in 3D PE mesh 160g/m² 120°c 100cm wide

The Slow Cure 206 is a low viscosity epoxy curing agent for extended working time and where a longer cure time is required. When combined with Epoxy 105, the cured resin/hardener mixture produces a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Pump required: Model A pumps - WS301A Sold without pumps.

Bio-based transparent casting, molding, and inlay epoxy resin CCR Applications: jewellery, river tables, and more. Transparency: ensures exceptional clarity. Low viscosity: allows for moulding, casting, and degassing for a smooth, bubble-free finish. UV protection: CCR epoxy protects creations from yellowing. Suitable hardeners: choice between slow or fast hardener depending on the project. Eco-friendly: 30% bio-based content Fast Hardener CCF Slow Hardener CCS Curing time 24 hours 72 hours Pouring thickness - 2cm +2cm (see technical data sheet) CCS slow hardener for ENTROPY's CCR biobased casting and molding resin. Designed for casting, inlay and coating applications in high thickness (62mm with the fast hardener and 100mm with the slow hardener) Frequent use: jewellery, thick coating and casting. Super Sap® formulation. 30% biobased content USDA BioPreferred Certified

Durcisseur CLS (Slow), CLF (Fast) or CLX (Extra Fast) for BRT/CLR epoxy resin from Entropy Resins, designed for the lamination and hot coating of surfboards, paddleboards, and other sliding sports. - Areas of application: surfboards, paddleboards, coating... - Suitable hardeners: choice between slow, fast, or extra fast hardener depending on the project. - UV protection: UV resistant and low yellowing - Eco-friendly: 30% bio-based, USDA BioPreferred certified. white or low colour standing. Choice of hardener: Extra Fast CLX Fast CLR Slow CLS Touch dry (at 25°C) 2 hours 4 hours 8 hours Full curing time 7 days at 25° 7 days at 25° 7 days at 25°C ENTROPY optical grade biobased epoxy resin providing UV resistance for white or low colour standing surfboard or paddleboard applications.

Optical grade ENTROPY biobased epoxy resin providing UV resistance for white or low color standing surfboard or paddleboard applications.

ONS (Slow) or ONF (Fast) hardener for ONE epoxy resin from Entropy Resins, designed for general laminating, coating and bonding applications. - Environmentally friendly: 30% biobased, USDA BioPreferred certified. - Versatility: Suitable for a wide range of applications. - Low viscosity and debubblization: bubble-free, smooth results. Choice of hardener: Fast ONF Slow ONS Dry to the touch (at 25°C) 3 hours 8 hours Full cure time 7 days at 25° 7 days at 25°C

Epoxy amine cleaning solution Designed to remove uncured epoxy from tools, workbenches, mini-pumps, etc. Can also be used to clean amine traces from cured epoxy. Safe and easy to use. Recommended equipment: - Disposable gloves. Ref: WS832-50 - Graduated mixing jar. Ref: WS805 - Reusable mixing sticks. Ref: WS804-25

PRO-FIX 51 is designed to be used in the manufacture of polyester, vinylester or epoxy composite parts - especially using infusion and RTM technologies - for dry positioning of base materials in molds. High adhesion to gelcoat, fiberglass, fiberglass laminates... Contains a blue dye that allows evaluation and regulation of the amount applied. The colour disappears during the polymerization process.

This spreading rake is specially designed to ensure the uniform application of floor coverings. Adjustable 10 cm metal pins for precise applications. Technical specifications: Material: Stainless steel Colour: Black Dimensions: Length: 600 mm Edge height: 45 mm Handle NOT included but fits most handles

Static mixing cannulas for Six10 cartridge Allows a correct dosage Packaging: pack of 10 units For professionals, for all requests for discounted prices on West System products, please contact us to obtain your quote.

Polyethylene T-connector for vacuum infusion. PVT-10
Materials: PE (polyethylene)
Diameter: 10 mm
Maximum operating temperature: 100°C

Polyethylene T-connector for vacuum infusion. PVT-12 Materials: PE (polyethylene) Diameter: 12 mm Maximum operating temperature: 100°C

Polyethylene T-connector for vacuum infusion. PVT-18 Materials: PE (polyethylene) Diameter: 18 mm Maximum operating temperature: 100°C