Résine-Net

Spatula for gluing
To be screwed on the nozzle for the application of West System MPS-4000 adhesive

5mm wide x 2mm thick self-adhesive joint tape made of polypropylene, very easy to install. Sold by 5 rolls. Roll of 9 metres. A total of 45m. Suitable for joints of 4mm and 5mm. Saves/reduces the amount of caulking joint to be used.

Self-adhesive sealing compound for high temperature (180°C) cream colour Specially designed for high temperature oven and autoclave processing Compatible with most vacuum bagging films. Thickness 3mm x12mm x15ml

Mastic d’étanchéité autocollant couleur blanc/crème pour haute température (150°C) Specially designed for high temperature oven and autoclave processing Compatible with most vacuum bagging films Will not stain your substrate Thickness 3mm x12mm x15ml

RE-MESH is a slow draining separator film (P31) used for vacuum infusion. Composed of a polyolefin separation film PRO-VAC 500 P31 and a blue sheet PROVAC KM160B 150g/m². Saves time in setting up the infusion. Less glue needed to hold in place. Easier to handle, to cut and to place in the mould. Width: 1450mm Maximum use: 120-125°C

Spatulas specially designed to offer perfect precision and versatility for your projects. Technical specifications: Material: Semi-rigid plastic Color: Light blue Sizes: Spatula 1: 75 mm x 50 mm Spatula 2: 105 mm x 80 mm Spatula 3: 105 mm x 100 mm Spatula 4: 105 mm x 120 mm

Stainless steel spatulas specially designed to offer perfect precision and versatility for your projects. Technical specifications: Material: stainless steel Color: red and steel Size: Spatula 1: 75 mm x 50 mm Spatula 2: 105 mm x 80 mm Spatula 3: 105 mm x 100 mm Spatula 4: 105 mm x 120 mm

Teflon coated glass fabric used for demolding. Non-developable. Adheres to metal as well as wooden molds. Stable during curing and autoclave. Recommended for use on flat or single curved surfaces. Can be assembled with a butt joint. Width 1000mm. Sold by the metre. Maximum temperature: up to 320°c.

Designed primarily for teak boat deck joints 305ml cartridge Curing time: 4 to 5 days before sanding. For approximately 10 linear metres of 5x5mm joint Available in 592ml pouch Colour: BLACK (also available in white and grey) Can be used without primer! 305ml cartridge For about 12ml of 5x5mm seal Available in 592ml Colour: white, grey or black

Designed primarily for boat teak deck joints 305ml cartridge Curing time: 12 to 15 days before sanding. For approximately 10 linear metres of 5x5mm joint Available in 592ml pouch Colour: GREY (also available in white and black) Can be used without primer!