Outdoorstone Overview
Outdoorstone is a benchmark in stone carpet resins.
This resin will look great in any space, whether indoors or outdoors.
Ideal Application and Storage Conditions
- Ambient temperature: 15°C to 35°C
- Substrate temperature: 12°C to 25°C
- Humidity: 75% maximum
- Storage: Store in unopened packaging at an ambient temperature of between 15°C and 25°C.
- Shelf life: 6 months
Common Uses
- Outdoor areas (terraces, patios, courtyards, etc.)
- Indoor areas (entrance hall, office, etc.)
Colours Available
Outdoorstone is colourless, but there is a wide range of aggregate colours available.
Packaging
- 10 kg (5 kg resin + 5 kg hardener)
- 20 kg (10 kg resin + 10 kg hardener)
- 40 kg (20 kg resin + 20 kg hardener)
Advantages
- UV-resistant
- Customisation: Wide range of aggregate colours available and you can create any pattern you like
- Comfort: Very pleasant to the touch
Consumption
- For 25 kg of aggregate (2.5/5 mm) and 1.25 to 1.5 kg of OUTDOORSTONE: the mixture covers approximately 1.5 m² at a thickness of 1 cm.
- For 25 kg of aggregate (3 mm) and 1.25 to 1.5 kg of OUTDOORSTONE: the mixture covers approximately 2 m² at a thickness of 7 to 8 mm.
Application Advice
- Prepare the surfaces: they must be stripped (sandblasted, planed, shot-blasted, diamond sanded). And free of dust, grease, oil, moisture, etc.
- Optional steps: Apply POXYFIRST primer (approx. 300 g/m²). A 2nd coat may be necessary on very porous surfaces (150 to 200 g/m²). To ensure good adhesion and ease of application, the primer should be sanded with dry quartz type 0.4/0.8 (Do NOT sand over). After this step, lay the stone carpet the next day.
- In a pot, mix half the resin and half the hardener for 2 to 3 minutes at a speed of 400 rpm until a homogeneous mixture is obtained (do not overmix to avoid the risk of exothermia).
- Add this mixture to the Marble or Quartz, then mix until a homogeneous mixture is obtained, following the consumption proportions given above.
- Spread the mixture over the floor and smooth with a metal trowel.
- Leave to dry for approximately 72 hours.
Technical Data
| Mixing ratio by weight: | Comp. A (Resin) : 1 Comp. B (Hardener) : 1 |
| Mixing ratio by volume: | Comp. A (Resin) : 1 Comp. B (Hardener) : 0.88 |
| Theoretical density of mixture: | 1.08 |
| Dry extract: | 99.5 % |
| Adhesion to concrete: | > concrete cohesion |
| Viscosity: | 2900 mPa ± 400 at 25 °C |
| Thermal shock resistance: | 150 °C |
| Mixture life: | 100 g sample: 50 min at 20 °C |
| Curing time: | 6 h at 20 °C |
| Dust-free: | 9 h at 20 °C |
| Walkable: | 24 h at 20 °C |
| Ready for use: | 72 h at 20 °C |
| Hardness after 28 days at 20 °C: | 62 shore D |
