Wencon - Underwater Coating - UNDERWATERCOATING(ONCARTRIDGE)

Manufacturer: Wencon
Durable underwater coating for effective repairs on wet and submerged surfaces.
Manufacturer part number: UNDERWATERCOATING(ONCARTRIDGE)
Vendor: ConceptSRP
€192.00
i h

WENCON UW Coating

WENCON UW Coating is an abrasion and corrosion resistant two-component epoxy, that will adhere and cure on dry, wet as well as submerged surfaces.

  • Suitable for touch-up repairs on superstructures and pipings in general.
  • 100% solid and solvent free coating, capable of building up to 500μm thickness in one layer.
  • Can be applied on surfaces where it is not possible to obtain a 100% clean and dry repair area, in splash-zones as well as underwater.
Products specifications
Detailed SpecificationsMixing: Component A and Component B are combined in the static mixer nozzle that is screwed on to the cartridge before application can begin. Discard the first 1 cm, of the product until product is evenly coloured, and begin application. If the product has cured, replace the nozzle with new static mixer nozzle. Application: Apply using a brush or spatula, single or double layer.
ApplicationPHYSICAL PROPERTIES Consistency: fluid Mixing ratio vol. A:B = 2:1 (volume) Apply with: spatula/brush Potlife at 20˚C 20-35 min. Curing time: 8 - 18 hours Machinability: yes Hardness: shore D 79 Tensile strength Rcrack: 37,50 N/mm2 Compressive strength Rcrack: 133 N/mm2 Compr.strength modulus of elasticity: 3.117 N/mm2 Shear adhesion: 31,90 N/mm2 Adhesion to steel: >7,5 N/mm2 Specific volume: 535 cm3 / kg Dielectric strength: 10 KV/mm Shelf life: 36 months
ColourColors Orange (most colors are available9