Wencon - Pipe Repair Kit with Tape and Putty - 1047

Manufacturer: Wencon

Quickly seal leaks and cracks with the Wencon Pipe Repair Kit, featuring putty and tape for effective repairs.

Manufacturer part number: 1047

€208.70

Qty:

i h

Wencon Pipe Repair Kit

The Wencon Pipe Repair Kit contains Wencon Putty, repair bandages, gloves and plastic bags.

Wencon Putty is a very quick curing, two component, epoxy compound supplied in a practical stick format, which is easy to use.

This multipurpose epoxy paste is ideal for a wide range of emergency repairs where an ultra quick curing and moldable compound is required.
Typical applications are patching sealing and filling of cracks, leakages and holes in pipes, on flanges, in tanks etc.

Curing Time	10 - 20 minutes
Application Procedure	Simple apply procedure with cut and knead
Functionality	Patches and seals cracks, leakages and holes
Adhesion	Strong adhesion to all metal surfaces
Machinability	Fully machinable

Products specifications

Colour	Natural
Detailed Specifications	Pipe Repair Kit Application areas Typcal applications are repairs in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.
Other Information	Instructions, for use.
Application	Pipe pressure without Wencon Putty: 10 Bar (145 p.s.i.) ) Pipe pressure with Wencon Putty: 50 Bar (725 p.s.i.) ) Flexural strength: ASTM D709 111 N/mm². Tensile strengt: ASTM D638 172 N/mm². (15,800 p.s.i.) Compression strength: ASTM D695 180 N/ mmsq. (25,600 p.s.i.) Adhesion at one-inch single overlap: 19 N/ mm². Dielectric strength: 16 KV/mm² Shear adhesion: 19 N/mm² (ASTM D1002) TEMPERATURE RESISTANCE Continuous: 120°C (248°F) Peak: 190°C (374°F) CHEMICAL RESISTANCE The Pipe Tape is resistant to oil, water, salt water and most diluted acids and alkalis as well as a range of solvents