Very useful for bonding, sealing, and plugging on a wide majority of materials thisUHU pack contains a Power Pistol cartridge gun and two cartridges of instant grab Polymax sealant. Ultra-resistant, the Power Pistol sealant gun allows for precise and easy application of silicone. ThePolymax Invisible Instant Grab Sealant is designed for a very strong initial grab and rapid resistance. The product can be used on a wide variety of materials (glass, stone, iron, aluminium, steel, and many others) and also on numerous surfaces, whether smooth, porous, or non-porous. After application, the sealant is odourless and invisible, in addition to having resistance to extreme temperatures, water, UV, and weather conditions.
Not suitable for PE, PP, PTFE, and bitumen. Care should be taken when bonding plastic; a test is necessary to determine adhesion.
Power Pistol :
- An essential tool for all DIY enthusiasts!
- Technology with immediate stop system = no dripping
- Very robust
- Compatible with all cartridges
- Rotatable at 36° to reach hard-to-access areas
Polymax Invisible Instant Grab Sealant :
- Polymax is a universal adhesive with SMP polymer technology
- Can be used indoors and outdoors
- Resistant to temperatures from -40°C to +100°C
- Resistant to water, UV, and weather conditions
- Excellent adhesion without primer
- Permanent elasticity
- 1% adhesive (non-shrinking)
- Solvent-free, acid-free: odourless
- Initial grab in 10 seconds and final grab in 4 hours
- Density: 1.05 g/cm³
- Colour: invisible
- Base raw material: modified silane polymers
- Initial grab after 2 hours (may vary depending on circumstances)
- Final resistance after 4 hours (may vary depending on circumstances)
- Touch dry time: 15-30 min
- Resistance to extreme temperatures: from 100 to -40°C
- Weight: 2 x 300 g
- Ref. 48503-33883x2
Power Pistol :
- Place the cartridge by pressing the small lever at the back of the gun and pull the metal rod of the scale hook all the way back
- Slide the nozzle through the ring at the front and place the cartridge in its holder
- Pull the trigger until the adhesive or sealant comes out of the nozzle
- As soon as the trigger is released, no more product comes out of the cartridge thanks to the immediate stop system.
- To remove the cartridge from the gun, press the small lever again and pull the metal rod back, then remove the cartridge
Transparent Fixing Sealant:
Bonding and assembling:
- Apply the adhesive in strips or blobs (every 1-4 cm). Always apply adhesive at the corners and along the edges
- Assemble the materials in the correct position within 1 minute and press firmly or lightly tap with a rubber hammer
- Support or prop up heavy materials for 4 hours if necessary
- Can be worked after 2 hours; the joint will be strong enough to be moved or subjected to light load
- Maximum final resistance is reached after approx. 4 hours depending on the substrate and ambient conditions
Sealing:
- Inject the sealant evenly into the joint and smooth within 1 minute using a spatula or wet finger (preferably) with soapy water
- Smooth vertical joints from bottom to top
- Skin after approx. 15 minutes
- Full curing after a few days (depending on the thickness of the adhesive layer)
- When covering with an alkyd paint, it may be that the paint dries more slowly
A UHU Power Pistol pack - 2 cartridges of Polymax Invisible Instant Grab Sealant - 2x300g
Delivered in its original packaging
