The Polymax UHU Invisible immediate grab sealant cartridge - 300 g - 33883 is suitable for bonding, sealing, and filling with a very strong initial grab and high rapid resistance. The product can be used on the vast majority of materials (glass, stone, iron, aluminium, steel, and many others) and also on numerous surfaces, whether smooth, porous, or non-porous. After application, the adhesive is odourless and invisible, in addition to having resistance to extreme temperatures, water, UV, and weather conditions.
Not suitable for PE, PP, PTFE, and bitumen. Care should be taken when bonding plastic; a test is necessary to determine adhesion.
- Polymax is a universal adhesive with SMP polymer technology
- Can be used indoors and outdoors
- Resists temperatures from -40°C to +100°C
- Resistant to water, UV, and weather conditions
- Excellent adhesion without primer
- Permanent elasticity
- 1% adhesive (non-shrinking)
- Solvent-free, acid-free: odourless
- Initial grab in 10 seconds and final grab in 4 hours
- Density: 1.05 g/cm³
- Colour: invisible
- Base raw material: modified silane polymers
- Initial grab after 2 hours (may vary depending on circumstances)
- Final resistance after 4 hours (may vary depending on circumstances)
- Touch dry time: 15-30 min
- Resistance to extreme temperatures: from 100 to -40°C
- Weight: 300 g
- Ref. 33883
Bonding and assembling:
- Apply the adhesive in strips or blobs (every 1-4 cm). Always apply adhesive to corners and along edges
- Assemble the materials in the correct position within 1 minute and press firmly or lightly tap with a rubber mallet
- Support or brace heavy materials for 4 hours if necessary
- Can be worked after 2 hours; the joint will be strong enough to be transported or subjected to light load
- Maximum final resistance is achieved after approx. 4 hours depending on the substrate and ambient conditions
Sealing:
- Inject the sealant evenly into the joint and smooth within 1 minute using a spatula or wet finger (preferably) with soapy water
- Smooth vertical joints from bottom to top
- Skin forms after approx. 15 minutes
- Complete curing after a few days (depending on the thickness of the adhesive layer)
- When covering with an alkyd paint, it may be possible that the paint dries more slowly
An immediate grab sealant Polymax UHU Invisible cartridge - 300 g - 33883
Delivered in its original packaging
