The UHU 35570 Extreme Express All-Purpose Glue has three main functions: to bond, repair, assemble, and seal materials on most types of surfaces. It is effective for your indoor as well as outdoor projects. You can easily fix heavy materials with a quick initial grip. The UHU glue can be applied to fill cracks in walls and ceilings.
- All-purpose glue with SMP polymer technology
- Suitable for indoor and outdoor use
- Resistant to temperatures from -4°C to +1°C
- Resistant to water, UV, and weather conditions
- Excellent adhesion without primer
- Permanent elasticity
- 1% glue (non-shrinking)
- Solvent-free, acid-free: odourless
- Initial grip in 1 minute and final grip in 4 hours
- Initial grip: 1 min
- Final grip: 4 h
- Drying time: from 30 minutes to 4 hours (final resistance may vary depending on circumstances)
- Colour: white
- Base raw material: modified silane polymers
- Temperature resistance: -40 °C - +100 °C
- Density: approx. 1.53 g/cm3
- Tensile strength: approx. 270 N/cm2
- Shear strength: approx. 350 N/cm2
- Flash point: K3 (>55°C)
- Shrinkage: approx. 0 %
- Hardness (Shore A): approx. 65
- Elasticity E-modulus: approx. 2.3 MPa
- Elongation at break: approx. 250
- Ref. 35570
Both components must be firm, clean, and free from dust and grease. The application of a primer is not necessary. The surface can be slightly damp.
Bonding and assembling:
- Apply the glue in strips or blobs (every 1-4 cm). Always apply glue at the corners and along the edges
- Assemble the materials in the correct position within 1 minute and press firmly or lightly tap with a rubber mallet
- Support or brace heavy materials for 4 hours if necessary
- Can be worked on after 2 hours; the joint will be strong enough to be transported or subjected to light loads
- Maximum final strength is reached after approx. 4 hours depending on the substrate and ambient conditions
Sealing:
- Inject the sealant evenly into the joint and smooth within 1 minute using a spatula or wet finger (preferably) with soapy water
- Smooth vertical joints from bottom to top
- Film forms after approx. 15 minutes
- Full curing takes a few days (depending on the thickness of the glue layer)
- When covering with an alkyd paint, it may be possible that the paint dries more slowly
An UHU Extreme Express All-Purpose Glue white cartridge 425g - 35570
Delivered in its original packaging
