Teak Cleaner - T18 Teak Step 2 - Nautic Clean
Formulated and tested in our laboratories specifically to revive teak and restore its beautiful original appearance.
TEAK STEP 2 brightener is an acid-based product that does not attack wood, joints, or stainless steel.
The ideal is to use it in combination with TEAK STEP 1. The result is extraordinary, TEAK STEP 2 is the perfect brightener for teak.
Advantages:
•Perfect brightener.
•Perfect restoration of teak in combination with TEAK STEP 1 Cleaner Stain Remover.
•Does not alter joints (tested in laboratory).
•Does not alter stainless steel (tested in laboratory).
•No rinsing between the two phases, time-saving.
•Without hydrochloric acid
The product in video
Usage tips:
Apply pure or diluted to 50% with water depending on the condition of the teak.
After applying TEAK STEP 1, without rinsing, put TEAK STEP 2 in a bucket and using a clean deck brush, gently spread in the direction of the grain.
You will notice the reaction, your teak lightens as you spread it to regain its beautiful original appearance.
Leave to act for 5 to 10 minutes then rinse thoroughly with water while scrubbing with a soft brush to avoid damaging the teak fibers.
Attention:
Do not allow TEAK STEP 2 to dry on the teak.
We recommend wearing protective clothing: gloves, boots, overalls, goggles.
Technical specifications:
Physical state: colourless liquid pH: 0.5 - Density: 1.13
Environmental biodegradability: The detergent substances contained in the product comply with the legislation on the environmental performance of
detergents and surfactants and are biodegradable. Complies with EC regulation no. 648/2004.
Storage: keep the container hermetically sealed away from cold and heat in a ventilated place.
Components: < 5% non-ionic surfactants.
