SIKA Treatment and Protection Pack - Sikagard-130 Stop Algae Pro 5L - Sikagard-790 All-in-one 5L for a complete cleaning of your surfaces as well as long-term protection against dirt. The Sikagard-130 Stop Algae Pro algicide and fungicide treatment is a colourless, odourless liquid ready to use that does not require rinsing. Its professional formula, reinforced with active ingredients, eliminates dirt and black residues, green and red algae, and limits their reappearance. It is applied using a low-pressure sprayer from spring to autumn on outdoor surfaces and installations as well as leisure equipment. Powerful, it does not degrade materials and can be applied both horizontally and vertically. The Sikagard 790 All-in-one water-repellent protection is a ready-to-use impregnation product designed to protect all porous or slightly porous mineral surfaces against the penetration of water-based liquids and oils. It prevents or significantly reduces stains and the soiling of materials. The protection does not create a film on the surface and is therefore completely invisible. It also facilitates the cleaning of graffiti, which must, however, be removed using appropriate cleaners. The product can be used on facades, roofs, and floors.
Specialising in chemical products, Sika is a leader in the development and manufacturing of systems and products for bonding, sealing, sound insulation, reinforcement, and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now!
Sikagard-130 Stop Algae Pro:
- Powerful and does not degrade materials
- Quick application without rinsing
- Applicable horizontally and vertically
- Applicable on all surfaces: slate, shingle, stone, brick, concrete, mortar, fibre-cement, plaster, tiles, polyester, zinc ...
- Acts quickly and does not leave marks on materials, improving their appearance
- Durable preventive effect
- Can be painted or covered with a coating once dirt is removed
- Its areas of use are very varied:
- Buildings: facade walls, roofs, terraces, balconies, outdoor stairs…
- Outdoor installations: paving, paths, fences, basins, statues, balustrades, non-fish ponds and reservoirs…
- Leisure equipment: tennis courts, boat hulls, caravans…
Sikagard 790 All-in-one:
- Aqueous phase product
- Indoor / outdoor use
- Protects against the penetration of water, oil, diesel
- Protects against stains
- Suitable for all types of facades, floors, and roofs
- Usable on most construction materials
- Quick application (in 1 or 2 coats) without waiting time between 2 coats
- Offers invisible protection
- Allows the substrate to breathe
- Resistant to ultraviolet rays, does not yellow
- Gives a beading effect on certain materials
- Facilitates the cleaning of graffiti (use a specific anti-graffiti cleaner, follow the manufacturer's recommendations)
Sikagard-130 Stop Algae Pro:
- Density: ≈ 1
- pH value: ≈ 8
- Application temperature: Treat in dry weather with at least 48 hours without rain after application. Do not apply in excessive heat, frost-thaw on too hot surfaces (>30°C risk of evaporation).
- Consumption: 1 L for approximately 7 to 10 m²
- Shelf life: 3 years in its original unopened packaging
- Storage conditions: Protect from frost and heat
- Colour: Colourless
- Capacity: 5 L
- Ref. 698564
Sikagard 790 All-in-one:
- Density: approximately 1 at 20°C.
- pH: approximately 6 at 20°C.
- Application temperature: + 5°C minimum to + 30°C maximum.
- Consumption: on very porous surfaces: from 0.30 L to 0.60 L per m² and per coat / on slightly porous surfaces: from 0.05 L to 0.20 L per m² and per coat.
- Colour: Colourless
- Ref. 529651
A SIKA Treatment and Protection Pack - Sikagard-130 Stop Algae Pro 5L - Sikagard-790 All-in-one 5L1 x SIKA algicide and fungicide treatment - Sikagard-130 Stop Algae Pro - 5L1 x Sikagard 790 All-in-one water-repellent protection - 5L Delivered in their original packaging Read the instructions carefully before using the product
