SIKA Mortar and Repair Pack - SikaMonoTop 1010 3 2kg - SikaMonotop 612F 25kg for carrying out repair work quickly and efficiently with a lower ecological impact than similar products. The SikaMonotop 1010 ready-to-use mortar is a single-component cement-based grout that will help you prepare your repair work in an eco-friendly manner. Indeed, a new formula has been implemented, allowing the mortar to generate less carbon impact compared to a traditional formula. Easy to use, Sika MonoTop 1010 is a multifunctional product that acts as both a corrosion inhibitor and a bonding primer. Before your repair work, you can use the product as a protective layer on concrete reinforcements against corrosion according to EN 1504-3. The SIKA quick repair mortar Sika Monotop 612 F is a fibre-reinforced R2 quick-setting repair mortar used for repairing concrete spalling. During setting and hardening, Sika Monotop 612R must be protected from frost, wind, and sunlight.
Specialising in chemical products, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, strengthening, and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the firm's priorities for over 100 years now!
SIKA Mortar SikaMonoTop 1010 - 4 x 0.8 kg
- Reduced environmental impact
- Easy to use
- Ready to mix
- Excellent adhesion to concrete and steel
- High resistance to water and chloride penetration
- Applicable manually or by wet spray
SIKA quick repair mortar Sika Monotop 612 F - Grey - 25kg
- Good adhesion to most substrates (concrete, mortar, stone, brick)
- Improved cohesion of the mortar due to the incorporation of fibres to reduce the risk of shrinkage cracking
- Quick setting even at low temperatures
- A finished appearance "ready to paint" after 24 hours at 20°C
SIKA Mortar SikaMonoTop 1010 - 4 x 0.8 kg
- Chemical base: Portland cement, cement substitute binder, additives, selected aggregates
- Compressive strength: ~50 MPa after 28 days (EN 12190)
- Direct tensile adhesion: ~2.0 MPa after 28 days (EN 1542)
- Water vapour diffusion resistance: ~100 μH2O
- Carbon dioxide diffusion resistance: ~1200 μCO2
- Colour: Grey powder
- Packaging: Bucket
- Capacity: 4 x 0.8 kg
- Reference: 659853
SIKA quick repair mortar Sika Monotop 612 F - Grey - 25kg
- Fresh density: approximately 2.1
- Granulometry: 0 to 1.25 mm
- Thickness: applies from 4 to 60 mm thick in a single pass
- Application temperature: +5°C to +30°C
- Practical working time: 30 to 40 min (+5°C) / 20 to 25 min (+20°C) / 8 to 10 min (+30°C)
- Colour: grey
- Weight: 25kg
- Reference: 706
SIKA Mortar and Repair Pack - SikaMonoTop 1010 3 2kg - SikaMonotop 612F 25kg
1 x SIKA Mortar SikaMonoTop 1010 - 4 x 0.8 kg
1 x SIKA quick repair mortar Sika Monotop 612 F - Grey - 25kg
Delivered in their original packaging
Read the instructions carefully before using the product
