SIKA Mortar and Repair Pack - SikaMonoTop 1010 3 2kg - SikaMonotop 311FR 25kg for carrying out repair work quickly and efficiently with a lower ecological impact than similar products. The SikaMonotop 1010 ready-to-use mortar is a one-component cement-based grout that will help you prepare your repair work in an eco-friendly manner. Indeed, a new formula has been implemented, allowing the mortar to generate less carbon impact compared to a traditional formula. Easy to use, the Sika MonoTop 1010 is a multifunctional product that serves as both a corrosion inhibitor and a bonding primer. Before your repair work, you can use the product as a protective layer on concrete reinforcements against corrosion according to EN 1504-3. The SikaMonotop 311 FR rapid repair mortar is a fine, fibre-reinforced rapid repair mortar classified R3, used for structural and non-structural repairs of buildings, civil engineering works, and as joints for precast slabs and walls. This product is easy to apply on floors, walls, and ceilings thanks to its paste-like consistency.
Specialising in chemical products, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, strengthening, and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now!
SIKA Mortar SikaMonoTop 1010 - 4 x 0.8 kg
- Reduced environmental impact
- Easy to use
- Ready to mix
- Excellent adhesion to concrete and steel
- High resistance to water and chloride penetration
- Applicable manually or by wet spraying
SIKA Rapid Repair Mortar Sika Monotop 311 FR - Grey - 25kg
- Easy application on floors, walls, and ceilings due to its paste-like consistency.
- Adheres perfectly to most substrates (concrete, mortar, stone, brick)
- Fast setting and hardening
- Immediate and aesthetic finish
- High pH, passivating steel
SIKA Mortar SikaMonoTop 1010 - 4 x 0.8 kg
- Chemical base: Portland cement, cement substitute binder, selected additives, aggregates
- Compressive strength: ~50 MPa after 28 days (EN 12190)
- Direct tensile adhesion: ~2.0 MPa after 28 days (EN 1542)
- Water vapour diffusion resistance: ~100 μH2O
- Carbon dioxide diffusion resistance: ~1200 μCO2
- Colour: Grey powder
- Packaging: Bucket
- Capacity: 4 x 0.8 kg
- Reference: 659853
SIKA Rapid Repair Mortar SikaMonotop 311 FR - Grey - 25kg
- Granulometry: Less than 0.8 mm
- Thickness: vertically: between 3 and 40mm / underside: 3 and 10mm
- Application temperature: 5°C to 30°C
- Practical usage time: 15min (at 20°C)
- Setting time: Start: approximately 1h30 / End: approximately 3h
- Consumption: approximately 1.6 kg of powder/m²/mm of thickness
- Colour: grey
- Packaging: 25kg
- Reference: 74811
SIKA Mortar and Repair Pack - SikaMonoTop 1010 3 2kg - SikaMonotop 311FR 25kg
1 x SIKA Mortar SikaMonoTop 1010 - 4 x 0.8 kg
1 x SIKA Rapid Repair Mortar Sika Monotop 311 FR - Grey - 25kg
Delivered in their original packaging
Read the instructions carefully before using the product
