SIKA Cleaning and Floor Protection Pack - Sikagard-127 Stop 20L - Sikagard-212 Satin Floor Protector 20L is ideal for giving a fresh look, treatment, and long-lasting protection to your floors. The Sikagard-127 Stop All in 1 is an ultra-effective treatment for green, black, and red stains. Its professional formula is enhanced with active ingredients for a unique treatment of roofs, facades, and floors. Colourless, odourless, and ready to use, it requires no rinsing and can be applied both horizontally and vertically on all surfaces without leaving any marks. The Sikagard-212 Satin Floor Protector is a ready-to-use water-based resin that is UV resistant. This product effectively waterproofs porous surfaces and protects against the penetration of water, oil, and most stains (grease, dirt, etc.). It also acts as an effective binder when used on sand joints. It penetrates deeply into the joint, helps keep the paving stones in place, and protects them from infiltration. It is suitable for surfaces made of concrete, stone, paving, etc. Ideal for pedestrian areas, spaces exposed to vehicle traffic, parking lots, terraces, balconies, pavements, etc.
Specialising in chemical products, Sika is a leader in the development and manufacturing of systems and products for bonding, sealing, soundproofing, reinforcement, and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now!
Sikagard-127 Stop All in 1:
- Applicable horizontally or vertically
- Applicable on all surfaces: slate, shingle, stone, brick, concrete, mortar, fibre-cement, plaster, tiles, polyester, zinc...
- Acts quickly and leaves no marks on materials, improving their preservation
- Durable preventive effect
- Can be painted or covered with a coating once the marks are removed
Sikagard-212 Satin Floor Protector:
- Water-based product
- UV and weather resistant
- Protects against water, oil, and diesel
- Reduces staining and contamination by hydrocarbons
- Resistant to de-icing salts
- Improves resistance to freeze-thaw cycles
- Revives the surface, giving it a satin finish
- Facilitates cleaning of the surface and promotes its maintenance
- Reduces efflorescence
- Easy application
- For outdoor use
Sikagard-127 Stop All in 1:
- Density: approximately 1
- pH value: approximately 8
- Consumption: 1 L for approximately 7 to 10 m²
- Colour: colourless
- Volume: 20 L
- Ref. 698420
Sikagard-212 Satin Floor Protector:
- Density: approximately 1
- pH value: approximately 9
- Consumption: non-joint surfaces: 0.2 to 0.3 L/m² for the first coat - 0.10 to 0.15 L/m² for the second coat / Paving with sand joints: 0.5 to 1.5 L/m² for the first coat - 0.1 to 0.2 L/m² for the second coat
- Application temperature: +5°C min. / +30°C max
- Colour: White, colourless and satin after drying
- Volume: 20 L
- Ref. 704630
A SIKA Cleaning and Floor Protection Pack - Sikagard-127 Stop 20L - Sikagard Satin Floor Waterproofing 20L
1 x SIKA Sikagard-127 Stop All in 1 Treatment - 20L
1 x SIKA - Sikagard-212 Satin Floor Protector - 20L
Delivered in their original packaging
Read the instructions carefully before using the product
