The SADER TECH V8 acrylic adhesive - 18kg is a must-have for bonding technical or resilient soft floor coverings. With high performance and being solvent-free, it can be easily applied with a spatula or a roller. You can use it for PVC (homogeneous, heterogeneous, compact, and acoustic PVC on old PVC, shower concept PVC for floor and wall), rubber (in tiles and rolls up to 3-5mm thick), linoleum (in tiles, rolls, and acoustic), semi-flexible tiles, carpets of all types, wall protection plates, natural fibres on a latex backing (coconut, sisal, sea rush), polyolefins with a non-woven backing as well as needled with or without backing. This product is suitable for coverings that are subject to heavy use, whether for public spaces or private areas.
Supports must be resistant, sound, dry, clean, dust-free, flat, and free from greasy products. They must also comply with professional standards C.S.T.B.: DTU or CPT.
Concrete slabs or cement screeds must be prepared with a smoothing compound.
- Suitable for all types of resilient coverings
- Intense use on floors and walls
- Phthalate-free product
- Very strong tack allowing for quick bonding of coverings
- Very high final cohesion helps limit natural dimensional variations or thermal constraints of coverings
- Suitable for public spaces and private areas
- Low consumption of only 250 to 400 g/m²
- Composition: solvent-free acrylic adhesive
- Application temperature: +10°C to +30°C
- PVC open time: 10 to 15 minutes
- Rubber open time: 5 minutes "install while fresh"
- PVC open time: 60 minutes
- Rubber open time: 30 minutes
- Traffic opening: approximately 12 hours
- Final setting: 24-48 hours
- Consumption: 250 to 400 g/m²
- Colour: ivory
- Capacity: 18 kg
- Ref. 30606598
An acrylic adhesive SADER TECH V8 - 18kg
Delivered in its original packaging
