Product Description
Slow hardener with low viscosity. Mixed with resin 105, it produces a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties.
It also allows adequate working time at higher shop temperatures.
This product may also have a strong ammonia odor but is not likely to turn red.
Slow Hardener 206 is not intended for transparent coating.
Technical Specifications
- Pot life at 25°C: 20 to 30 minutes
- Cure to solid state at 21°C: 9 to 12 hours
- Cure to maximum strength at 21°C: 5 to 7 days
- Minimum recommended working temperature: 16°C
Consumption
| Surface Type | Consumption (for a 1kg mixture at 25°C) |
| Porous Surface | 6.5 - 7.5 m² |
| Non-Porous Surface | 8.5 - 9.5 m² |
Mixing Instructions
Mix resin and hardener for two minutes or longer at low temperatures. Scrape down the sides and bottom of the jar while mixing.
Additional Resources
- How to dose and mix your epoxy?
- Product Selection Guide
- Demonstration video on basic, advanced, repair techniques
- Dosing and mixing demonstration video
