Product Description
Entropy Resins' Eclipse and Whitecaps colourants are formulated from biobased materials to give you a long-lasting, opaque finish.
Eclipse is 73% biobased, Whitecaps 98%, and they are certified by the USDA BioPreferred programme.
Advantages
- These colourants are environmentally friendly and guarantee long-lasting performance.
- They are highly concentrated.
- They are suitable for deep pours and thin coats.
- They mix easily, without lumps.
- They can be used to create opaque shades.
Good to Know
- Colourants are compatible with most other epoxy resins on the market.
- For applications of less than 3mm, CLR epoxy resin is recommended, and for castings, CCR epoxy is ideal.
Instructions for Use
- Pour resin and hardener into a container in the ratio indicated on the back of the hardener.
- Mix the epoxy with a stirring stick for about 1 minute.
- Shake the bottle before opening. Add the colourant to the epoxy, gradually adding small quantities until the desired shade is achieved. Maximum recommended loading is 5% by weight or volume.
- Stir again for 1 minute until the colour is homogeneous.
- Pour the epoxy onto your project and allow to cure!
How to Darken or Lighten Colours?
- Darken colours: add a drop of Eclipse colour to soften or darken a shade that's too bright. One drop is often enough, so we recommend adding them gradually to avoid exceeding the desired shade.
- Lighten colours: to soften a strong colour, simply add colourless epoxy.
- Pastel colour: mix Whitecaps with other colours to create pastel colours.
Further Information
For further information, please consult the product data sheet.
