TheReady-to-use cleaner Sikagard-111 from SIKAis a high-performance alkaline solution specially designed to effectively eliminate the most stubborn organic dirt. Thanks to its strong wetting and degreasing power, it acts quickly on pollution traces, soot, grease, and outdoor grime.
Ready for use, this cleaner facilitates the maintenance of building surfaces without prior preparation. It is perfectly suited for cleaning facades, walls, terraces, and roofs while respecting the materials. Its formulation without bleach or acid helps preserve the integrity of the substrates and their original porosity.
Versatile, Sikagard-111 can be applied to many surfaces such as concrete, stone, tiles, block paving, slate, terracotta, marble, mortar, coatings, as well as certain synthetic materials like PVC, plastic, or rubber. A preliminary test is recommended to ensure optimal results.
Ideal for effective, quick, and safe outdoor cleaning, this SIKA cleaner in a 20-litre container is a reliable solution for treating a large area and thus removing dirt.
- Ready-to-use formula for immediate application.
- Suitable for use on facades, walls, terraces, and roofs.
- Can be used on many substrates: block paving, tiles, stone, slate, marble, terracotta, concrete, mortar, coatings, plastic, rubber, PVC (a test is recommended before each use).
- Product with a rapid action.
- Strong wetting and degreasing power for maximum efficiency.
- Formula without bleach or acid.
- Does not affect the porosity of treated substrates.
- Lightly moisten the substrate before application.
- In hot weather or windy conditions, thoroughly moisten the substrate.
- Apply Sikagard®-111 Ready-to-use Cleaner with a low-pressure sprayer.
- Spray from the bottom up to avoid streaks on the substrate.
- Allow to act for 5 to 15 minutes maximum, depending on ambient temperature and soiling.
- Never allow the product to dry on the substrate before rinsing.
- Rinse thoroughly with clean water from top to bottom with a high-pressure cleaner when the substrate allows.
- In the case of fragile substrates (such as slightly aged coatings/plaster), rinse with a water jet or low-pressure cleaner.
- A rinse with hot water will be more effective.
- In the case of heavily soiled surfaces, repeat the operation.
- Product type: Ready-to-use cleaner
- Volume: 20 litres
- Application area: Floors, facades, roofs, and terraces
- Use: Directly without dilution necessary
- Colour: slightly yellow
- pH value: 13.5
- Consumption: 1 litre for 4 to 10 m² (varies depending on the nature and porosity of the substrate)
Ready-to-use cleaner for floors, facades, and roofs SIKA Sikagard-111 - 20LDelivery in original packaging
