Brand new product never used. Original packaging damaged restored by us.
2-year warranty. Non-contractual photos.
From 3M's expertise in filtration, the 3M P02462 pneumatic orbital sander is a self-aspirating version that offers great autonomy and maneuverability in all general sanding operations (wood, acrylic plastic...). The dust is directly directed into the 3M bag compatible with this sander, thus all collected to optimize your work in a much healthier environment.
- The use of clean and lubricated compressed air will provide a measured air pressure to the tool of 6.2 bars when the tool is operating with the lever fully pressed.
- It is recommended to use a certified air line of 10 mm x 8 meters maximum length.
- Properly connect the tool to the air supply.
- Do not connect the tool to the compressed air circuit without providing an easily accessible shut-off valve.
- It is strongly recommended to use an air filter regulator and lubricator (FRL) that will provide the tool with clean lubricated air at the correct pressure. In any case, air pressure regulators will always be used if the tool is operated with a supply pressure that exceeds the maximum value indicated on the tool.
- If this equipment is not used, the tool must be manually lubricated:
- Disconnect the air line and pour 2 to 3 drops of a pneumatic lubricating oil into the end of the tool's hose.
- Reconnect the tool to the air supply and run the tool slowly for a few seconds to allow the oil to circulate.
- Lubricate the tool daily if it is used frequently or lubricate it when it starts too slowly or loses power.
- The tool can be used at lower pressures but never at a pressure exceeding 6.2 bars. If the tool is used at a reduced pressure, its performance will be diminished.
- Diameter: 152 mm
- Excentration: 5 mm
- Cycles per minute: 12000 rpm
- Motor power: 0.28 CV W
- Air flow SCFM (L/min): 17 (481)
- Weight: 940 g
- Length: 232 mm
- Height: 83 mm
- Velcro pad included: P20465
- Ref. Sander-3M2-black-diameter-152
1 x 3M pneumatic orbital sander Diameter 152 mm 1 x 3M lubricant 1 x adapter for suction bag 1 x plate tightening key (24mm) Without 3M P20452 bag without abrasive disc Delivered in its original packaging
