Lenze Locking Bush ETP CLASSIC 50MM, 83mm Shaft Diameter

Shaft Diameter = 83mm
Outside Diameter = 50mm
Locking Bush Type = Locking Bush
Flange Diameter = 65mm
Length = 82mm
Rated Torque = 1900Nm
Material = Steel
Minimum Operating Temperature = -30°C
Maximum Operating Temperature = +85°C
Series = ETP CLASSIC

To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.7, Cast Iron x 2.2, Aluminium x 2.7. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable. ETP Classic Locking Bushes. Unique hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for frequent operations for very accurate mounting of gears, pulleys, sprockets etc. High concentricity and self-centering Fast, easy locking and un-locking with few pressure screws Automatic release when screws are loosened Ideal for applications with smaller diameter hubs H7-h7 hub bore and shaft tolerances Radial concentricity 0.04mm Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C