The Julien aerosol paint for bodywork VEHIDECOR is ideal for refurbishing all types of vehicles. It can be applied to all metal surfaces indoors (generators, household appliances) and outdoors (car bodies, motorcycles, scooters, bicycles, lawnmowers). Its high-quality nitro-acrylic formulation makes it resistant to weather conditions, minor scratches, UV rays (without yellowing), and heat (up to 120°C) without cracking. It can also be used to decorate various household items.
- Surfaces must be clean, dry, rust-free, degreased, and especially well dusted.
- Mask off areas to be protected with newspaper and adhesive tape.
- For any previously painted surface, sand with water abrasive to dull the surface, remove paint flakes or any rust traces.
- If necessary, apply an appropriate body filler.
- Shake the aerosol well for 2 minutes before applying (you should hear the sound of mixing balls).
- Spray in a wide and even motion on the areas to be painted from a distance of 25-30 cm.
- Hold the aerosol upright.
- Shake regularly during application.
- Apply several thin coats rather than one thick coat.
- Allow to dry for 10 minutes to the touch and 24 hours for full depth.
- Use the aerosol in dry weather, sheltered from the wind, in a well-ventilated area.
- Store the aerosol in a dry place.
- Only use the aerosol for its intended purpose.
- Self-cleaning valve.
Use Julien products with caution. Before use, read the label and product information.
A Julien aerosol paint for bodywork in Thallium Grey 400ml Ral 37102
Delivered in its original packaging
