ITT Cannon Circular Connector, 4 Contacts, Cable Mount, Plug, Male, IP67, Trident Neptune Metal Series - TNM6S10-0004P1L / 192993-0011

ITT Cannon Circular ConnectorThe ITT Cannon Trident TNM series 4-contacts, the male circular connector has a plug(pin)-type connection. This cable mount connector has a voltage rating of 250VAC and a current rating of up to 16A per contact. This connector is made from strong nickel-plated zinc alloy shells with a metal coupling ring for high reliability and durability. This connector provides RF shielding from cable to equipment or cable to cable that satisfies EMC requirements. ITT TNM shielded Signal versions have the same planform and contact arrangements as the QM range so upgrading and interchangeability can be achieved. Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67. Cable, chassis and jam nut configurations available in standard and reversed formats. One, two or three-part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types. Note: Contacts and crimp tooling must be ordered separately (typical of contact range) for full selection of contacts.Features and BenefitsStraight body orientation Crimp termination method Shell size is 10 Durability of 200 mating cycles RF shielding inherent in the full metal construction Operating temperature ranging between -55°C and 105°CApplicationsIndustrial automation Commercial electronicsCertificationsIP67 rated UL approved