Key Features:
- Fast-drying, high-durability polyurethane varnish with a high gloss finish.
- Light amber color enhances the natural appearance of wood.
- Resistant to surface scratches, oil, mild acids, alkalis, and alcohol spills.
- Contains HALS (Hindered Amine Light Stabilizers) and UV absorbers to protect wood from sunlight.
- Superior flow and application characteristics ensure a smooth, professional finish.
- Optimized for use in cool or moderate climates.
- Suitable for all internal and external woods, including oily timbers such as Teak and Iroko.
Technical Specifications:
- Color: Light Amber
- Finish/Sheen: High Gloss
- Specific Gravity: 0.9
- Volume Solids: 42%
- VOC (As Supplied): 453 g/L
- VOC (EU Solvent): 500.6 g/kg
- Shelf Life: 2 years
- Pack Sizes: 375 ml, 750 ml, 2.5 L, 5 L
Materials:
- Polyurethane-based formulation
- Contains HALS and UV absorbers
Dimensions:
- Available Pack Sizes:
375 ml
750 ml
2.5 L
5 L
Compatibility Information:
- Suitable for all internal and external woods, including oily timbers such as Teak and Iroko.
- Not specified for use on aluminum propellers.
Application and Use:
- Preparation:
*Previously Varnished Wood:*
- In good condition: Clean with thinners, sand smooth with 280-320 grade paper, and remove sanding dust with thinners.
- In poor condition: Remove all previous coatings.
- *Bare Wood:*
- Sand smooth with 80-180 grade paper, then 280 grade paper.
- Remove sanding dust by brushing, dusting, and wiping.
- If wiping with solvent, allow to dry completely before applying the first coat.
- *Oily Woods (e.g., Teak):*
- Adequately degrease with Thinners No.1 and ensure the surface is completely dry before applying the first coat.
- Prime, if required, with Clear Wood Sealer/Clear Wood Sealer Fast Dry.
- Application Methods:
- Brush: Apply a minimum of 3 unthinned coats, sanding every 2-3 coats with 320-400 grade paper.
- Roller: If Clear Wood Sealer has been omitted, thin the first coat 10% with Thinner No.1.
- Spray: Airless Spray (Pressure: 176-210 bar/2500-3050 psi, Tip Size: 1365-1580) or Conventional Spray (Pressure Pot: 1-2 bar, Gun Pressure: 14.5-29 psi, Air Pressure: 8-10 psi, Tip Size: 1.8 mm).
Thinners:
- Brush: Thinner No.1
- Spray: Thinner No.3
Cleaning:
- Clean brushes before use.
- If rolling, use a thin nap roller and "tip-off" with a clean natural bristle brush or pad to avoid air bubbles.
Storage:
- Store in securely closed containers.
- Keep out of direct sunlight.
- Store between 5°C/41°F and 35°C/95°F.
Additional Information:
- For professional use only.
- Avoid painting in direct sunlight.
- Do not apply two-part varnishes over one-part varnishes.
- Ensure the surface is completely dry before applying the first coat.
- Avoid using Compass straight from the can to prevent premature aging and contamination.
- Failure to follow proper dry times can cause improper drying, wrinkling, and loss of adhesion.
- Product temperature should be between 15°C/60°F and 30°C/86°F.
- Ambient temperature should be between 5°C/41°F and 35°C/95°F.
- Substrate temperature should be between 5°C/41°F and 35°C/95°F.
