Fluke Networks FI-500 Single Mode & Multimode Fiber Inspection Scope

Fluke Networks Fibre Optic Test EquipmentThe Fluke Networks FI-500 fibre optic test equipment helps in getting rid of the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations. This test equipment is designed to simplify the inspection process. It fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope along with advanced features to reduce troubleshooting and inspection time. It is supplied with a FiberInspector probe, display, 4 UPC tips, case, rechargeable batteries and universal power adapter.Features and BenefitsPort Bright a built-in flashlight that illuminates dark areas and dense panels Autofocus feature for stable images in few seconds Large display to view single-mode and multimode fibre end faces Includes 4 UPC tips (LC, SC, 1.25mm and 2.50mm) The small-profile probe fits into tight spots and features push button controls for simple operation APC tips available 3.2in TFT LCD display with resolution 320 x 240 Display magnification options are 1x, 2x, 4x Display Fps is greater than or equal to 12 2 rechargeable NiMH batteries for display with rating 1.2V and 2700mAh Power adapter input rating for display is 100VAC to 240VAC ±10% at 50/60Hz with output of 6VDC and 3A Probe magnification with 200x zoom function has 1x, 2x and 4x settings Probe 5MP camera with CMOS sensor Probe field with view of 610µm x 460µm Probe resolution is 1µm Light source through LED has life greater than 100000 hours Coaxial blue LED for end face Illumination 2 white LEDs for port Illumination Power to probe is supplied through the USB interface Probe video output through USB 2.0 interfaceApplicationsMeasure and locate high loss splices Measure and locate high loss connections and breaks Locate the end of a fibre Find potential sources of errors caused by reflectance from dirty or poor connections Detect live optical signals before it begins testingCertificationsIEC 61010-1 IEC 62133Buy Fluke products and claim another Fluke product free. Between 1st September 2021 and 15th December 2021 customers who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed via www.fluke.co.uk/freefluke. There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only £100. For each level there is a fixed range of products to claim, based on the value of the original purchase.