The epoxy repair kit allows you to carry out small quick and waterproof repairs.
It allows you to bond, reinforce and seal.
It can be applied to wood, metal, polyester, stone and of course epoxy.
It is also ideal for repairing surfboards, paddles, windsurfing boards made of ASA, ABS, epoxy and polyester (not suitable for polyethylene).
This kit contains epoxy resin that can be used for bonding without fiberglass, a glass fabric strip for high-strength laminates or reinforcements, a filler agent for preparing a coating or putty as well as sandpaper.
Features: Epoxy repair kit
- Packaging: 250 g box, with hardener
- Colour: colourless
- Mixing ratio: 100: 60 parts by weight
- Pot life at 20°C: approx. 30 minutes
- Curing time at 20°C: minimum 24 hours
- Viscosity of the mixture at 20°C: approx. 900 mPa.s
The recommended application temperature is +20°C, ideal for the substrate and the resin.
In all cases, a minimum temperature of +10°C is required.
For bonding, carefully clean and degrease the area to be repaired or the contact surfaces and make them rough.
Thoroughly mix the resin with the hardener in the indicated proportions.
If you are using pure resin without fiberglass or filler, you need to use a mixing container that is large enough because the product foams due to the reaction temperature. If necessary, cool the container in a water bath.
