Sopalaq Epoxy Paint
Sopalaq is an epoxy paint specially designed to provide your walls with a high level of protection and an attractive finish. This paint is perfect for all your interior applications, offering your walls great resistance, even in demanding environments.
Applications:
- Milking parlours and dairies: Resistant to water and intensive cleaning products.
- Cutting rooms: Provides long-lasting protection against all splashes and moisture.
- Laboratories: Protects your walls against chemicals.
- All rooms that need to be washed with water.
Advantages:
- No joints or shrinkage: This coating provides a continuous, smooth surface that is easy to maintain.
- Perfect waterproofing: This epoxy paint guarantees total waterproofing, making it ideal for damp environments.
- Exceptional chemical resistance: This product is specially designed to resist aggressive chemicals such as acids, alkalis, fuels, and oils.
- Easy to clean: Easy to maintain, it can be hosed down without affecting its properties.
- Customisation: You can adapt it to your surface thanks to the wide range of colours available (see RAL photo).
Colours available:
See RAL photo
Packaging:
- 5 kg kit: 3.57 kg epoxy resin + 1.43 kg hardener
- 10 kg kit: 7.14 kg epoxy resin + 2.86 kg hardener
Application advice:
- Substrate preparation: substrates must be clean, dry and free of dust, oil, grease, curing compound, moisture, loose or crumbly parts, etc.
- Optional steps: Use our POXYFIRST primer for very porous substrates. For steel and aluminium, the substrate must be prepared by sandblasting to at least SA 2.5 degree of care.
- Pour all the hardener (comp.B) into the resin container (comp.A) (they are supplied pre-dosed), then mix for 2 to 3 minutes at a speed of 400 rpm using an electric agitator.
- Apply the mixture to the surface using a roller. Leave to dry for approximately 16 hours, then apply a second coat.
If you don't need the full kit, you can use a precision balance to divide it up. For example, 100 g resin to 40 g hardener.
Consumption:
Approximately 0.400 kg/m² per coat, but may vary depending on the porosity and roughness of the substrate.
Technical data
Tests carried out using the mixture at an average temperature of 20°C.
| Mixing ratio by weight: | Comp.A: 50 Comp.B: 20 |
| Theoretical mixture density: | 1.4 |
| Mixture viscosity: | 6700 mPas ± 1500 |
| Dry extract: | 95 % |
| Flash point: | >120 °C |
| Polymerisation after 24 H: | 50 % |
| Polymerisation after 72 H: | 95 % |
| Polymerisation after 6 days: | >95 % |
| Open time: | 1h30 |
| Pot life for a 200 g sample: | Approx. 45 min |
For more information, please contact us.
