Product Description
Entropy Resins colourants are formulated from 98% biobased materials. This vivid colour kit lets you add colour to your various projects, for art, moulding, jewellery, coatings, woodworking and more.
Shades Included
- Eclipse (Translucent Black)
- Whitecaps (Opaque White)
- Flamingo (Translucent Pink)
- Island Sunset (Translucent Orange)
- Sea Swell (Translucent Blue)
- Alluring Orchid (Translucent Violet)
Advantages
- These colourants are environmentally friendly and offer long-lasting performance.
- The colourants are highly concentrated.
- They are equally well suited to deep pours and thin coats.
- They mix easily, without lumps.
- They can be used to create both translucent and opaque shades.
- Translucent colours don't clump.
Good to Know
- Colourants are compatible with most other epoxy resins on the market.
- For applications under 3mm, CLR epoxy resin is ideal, and for castings prefer CCR epoxy.
Instructions for Use
- Pour the resin and hardener into a mixing container according to the ratio indicated on the back of the hardener.
- Mix the epoxy with a stirring stick for about 1 minute.
- Shake the bottle before opening. Add the colourant to the epoxy, gradually adding small quantities to achieve the desired shade. We recommend a maximum charge of 5% by weight or volume.
- Stir again for 1 minute until the colour is homogeneous.
- Pour the epoxy onto your project and allow to cure!
How to Darken or Lighten Colours?
- Darken colours: To soften or darken a colour that's too bright, add a drop of Eclipse colour. Usually one drop is enough, but we recommend adding them one at a time to avoid exceeding the desired hue.
- Lighten colours: if the colour is very intense, add colourless epoxy resin.
- Pastel colours: for pastel colours, mix Whitecaps with other colours.
Further Information
For further information, please consult the product data sheet.
