pH Regulator - pH Perfect - Zodiac Genph EU

Zodiac GenpH EU pH Regulator

Autonomous and secure pH regulation

AUTOMATIC pH DOSAGE
Water regulation and balance
In a swimming pool, the right balance mainly lies in the pH value of its water. It is essential to have a correct and stable pH for the oxidant (chlorine in particular) used in the pool to be effective. A well-adjusted pH allows for savings in oxidant use and helps avoid many inconveniences: eye irritation, algae growth, corrosion of coatings... pH Expert continuously measures the pH of the water and adjusts, if necessary, the dosage of the pH corrector in a 100% automated manner, without any settings.

ADJUSTMENT FINE-TUNING
Precise and self-adaptive dosing
GenpH injects the right amount of pH corrector thanks to its unique adaptive dosing technology, for perfect water balance, with a minimum of product. The dosing time is adjusted based on the difference between your pool's pH and the ideal pH.

SAFETY AGAINST OVERDOSAGE
With its exclusive safety system, GenpH prevents any risk of overdosage of the pH corrector for optimal water balance. Thanks to its exclusive suction pipe, the dosing of the pH corrector is perfectly secure.

Ultra-simple
Easy setup on the LCD screen.

Compensation for water alkalinity (TAC)
Automatic adjustment
For optimized use of the pH corrector, GenpH integrates a function that adapts the treatment injection cycles based on the alkalinity (TAC) of the water.

For which pools?
Maximum treated water volume: 150 m3

Dosing: Acid or alkaline

User interface: Backlit LCD screen 1 line
Languages: 6 (FR-EN-ES-DE-IT-NL)
Calibration: Semi-automatic in 1 or 2 steps (buffer solution kit provided)
Set point: Factory setting: pH = 7.4
Safeties: Overdosage safety "OFA" on 3 levels, adjustable (setting from 0 to 6 hours, default = 4 hours) Level sensor for the corrector product container (on anti-fume suction pipe)
Probe position: Vertical

Technical characteristics
Type of probe (pH) Combined probe, double junction and double porous, epoxy body Ø12 mm
Measurement range 0.0 - 14.0 pH
Measurement accuracy 0.1 pH
Probe tolerances 0-60 °C, water speed ≤ 2 m/s
Maximum back pressure (injection point) 1.5 bar
Peristaltic pump flow rate (pH) 1.5 L/h
Support clamps* On DN50 mm (original) or DN63 mm (optional accessory) pipes
Protection index IP65
Dimensions (l x h x d) 19.5 x 23.6 x 8.5 cm
Power supply 50 Hz 220-240 VAC
* Unnecessary if the "POD Kit" option is used.
General information
Warranty: 2 years

Accessories included in the pack:
- pH Probe
- Wall mounting kit
- Buffer solution kit
- Piping installation kit