Epoxy Finishing Putty - Below and Above the Waterline

The epoxy finishing putty is perfect for your touch-ups and repairs of surfaces below the waterline and on parts exposed to moisture.

This putty is two-component, fine, allowing for repairs of up to 2 cm in thickness without shrinkage.

It is suitable for polyester, epoxy, wood, carbon, steel, and aluminium.

Features: Epoxy finishing putty

• Mixing ratio by volume: Resin A, Hardener B: A:B = 2:1
• Filler: 100%
• Theoretical coverage for a thickness of 0.5 mm: 1.2 m²/kg
• Density: 1.78 g/cm3
• Flash point: 100°C
• Pot life at 20°C: 20 minutes
• Sanding: after 6 hours of polymerisation
• Can be painted: after 8 hours at 20°C