Under water coating (on cartridge) - Wenco

Manufacturer: Wencon

Manufacturer part number: UNDERWATERCOATING(ONCARTRIDGE)

€192.00

Qty:

i h

WENCON UW Coating

WENCON UW Coating is an abrasion and corrosion resistant two-component epoxy, that will adhere and cure on dry, wet as well as submerged surfaces.

Suitable for touch-up repairs on superstructures and pipings in general.
100% solid and solvent free coating, capable of building up to 500μm thickness in one layer.
Can be applied on surfaces where it is not possible to obtain a 100% clean and dry repair area, in splash-zones as well as underwater.

Products specifications

Detailed Specifications	Mixing: Component A and Component B are combined in the static mixer nozzle that is screwed on to the cartridge before application can begin. Discard the first 1 cm, of the product until product is evenly coloured, and begin application. If the product has cured, replace the nozzle with new static mixer nozzle. Application: Apply using a brush or spatula, single or double layer.
Application	PHYSICAL PROPERTIES Consistency: fluid Mixing ratio vol. A:B = 2:1 (volume) Apply with: spatula/brush Potlife at 20˚C 20-35 min. Curing time: 8 - 18 hours Machinability: yes Hardness: shore D 79 Tensile strength Rcrack: 37,50 N/mm2 Compressive strength Rcrack: 133 N/mm2 Compr.strength modulus of elasticity: 3.117 N/mm2 Shear adhesion: 31,90 N/mm2 Adhesion to steel: >7,5 N/mm2 Specific volume: 535 cm3 / kg Dielectric strength: 10 KV/mm Shelf life: 36 months
Colour	Colors Orange (most colors are available9

0 review(s)

Write your own review Close

Your name *

Your email *

Enquiry *

Only registered users can write reviews