Cream 1 kg, for surface rebuilding - Wencon

Manufacturer: Wencon
Be the first to review this product
Manufacturer part number: 1010
Vendor: ConceptSRP
€312.31
i h

Wencon Cream

Wencon Cream is a basic two-component, epoxy compound with a wide range of applications for repair and rebuilding of worn, damaged, cracked and corroded metal parts.

Typical Applications

  • Corroded tanks
  • Pump housings
  • Impellers
  • Valves
  • Pipes
  • Flange faces
  • Roller bearing seats
  • Worn shafts
  • Hydraulic rams
  • Heat exchangers

Wencon Cream is also excellent as a filling compound. Wencon Cream exhibits many of the characteristics of metals, which together with outstanding adhesion to all metallic surfaces makes the repair compound highly suitable for repair of corroded and worn metals.

Features

  • Wide range of applications
  • Strong adhesion to all metal surfaces
  • Low curing temperature
  • Simple mixing and application
  • Fully machinable
Products specifications
ColourLight Grey
ApplicationApplication areas Typical applications are corroded tanks, pump housings, impellers, valves, pipes, flange faces, roller bearing seats, worn shafts, hydraulic rams and heat exchangers. Wencon Cream is also excellent as a filling compound. Mixing Wencon products are designed to be simple to use and cost effective. Easy mixing ratios (1:1 by volume) reduce waste to a minimum and high specific volume gives high coverage rates.
Detailed SpecificationsMax temperature +60 – +250°C (140-482°F) Consistency paste Mixing ratio vol. 1:1 Apply with Spatula Potlife at 20°C 30-60 min. mixed in small amounts Curing time 10-15 hours Machineability yes Specific volume 775 cm3 / kg Dielectric strength 10 KV/mm
Other InformationInstructions, for use. pair of nitrile gloves. mixing knife. mixing plate.
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews