Speedy Carbonium is a two-component, medium-hard antifouling paint formulated with carbon as an active ingredient to enhance performance. Its quick-drying properties allow for the application of two coats in a single day. The smooth finish can be wet-sanded with 600-grit abrasive paper to achieve an ultra-smooth surface. Suitable for fiberglass, wood, steel, and aluminum hulls (with appropriate primers). Available in grey and black colors.
- High concentration of carbon for improved performance
- Quick-drying formulation allows for two coats in one day
- Smooth finish that can be wet-sanded for an ultra-smooth surface
- Suitable for various hull materials, including fiberglass, wood, steel, and aluminum (with appropriate primers)
- Available in grey and black colors
Technical Specifications:
- Theoretical Coverage: 10.6 m²/L
- Mixing Ratio: 2:1
- Overcoating Time: 4 hours at 20°C
- Launch Time: 12 hours at 20°C
- Thinner: 6470
Materials:
Two-component system with carbon as the active component.
Application Instructions:
- Prepare the surface by thoroughly cleaning and degreasing.
- Apply a suitable primer coat, such as Adherpox.
- Mix components A and B of the paint in a 2:1 ratio until a homogeneous consistency is achieved.
- Apply the paint using a spray gun, brush, or roller for uniform coverage. If necessary, dilute up to 5-10% with thinner 6470.
- Apply two to three coats, allowing a 4-hour overcoating time between each coat.
- After the final coat has dried, sand the surface with 600-grit wet abrasive paper to achieve an ultra-smooth finish.
