UHU special hard plastic glue - 30g - 34115

The UHU special hard plastic glue 34115 is a highly water-resistant adhesive specifically designed for bonding plastic materials such as PVC and ABS in combination with wood, paper, glass, metal, or ceramics. Water and oil resistant, you can safely repair your small appliances.

• UHU Special Glue: 1 need = 1 glue
• For bonding all types of plastics
• Quick and clean bonding
• Usable on all rigid plastic materials
• Resistant to temperatures between -3 °C and +9 °C
• Resistant to oil, water, acids, and diluted bases
• Initial setting in 4-5 minutes and final setting in 24 hours

• Initial setting: 4-5 mins
• Final setting: 24 hrs
• Resistant to temperatures between -30°C and +90°C
• Base raw material: acrylic ester/PVC copolymer
• Viscosity: approx. 20-25 mPa.s.
• Solid content: approx. 20%
• Specifications: Consistency: low viscosity
• Flash point: -19°C
• Ref. 34115

1. Surfaces must be clean, dry, and non-greasy
2. Apply to one of the surfaces (to both surfaces if they are porous or rough)
3. Immediately join the two surfaces
4. Hold the two surfaces firmly together

Tip: When dealing with hard non-porous surfaces, allow to dry for 3-4 mins. Apply a second layer of glue on one side and join – fix briefly. Initial rigidity after approx. 5 mins, final setting after 24 hours. Special indications: For thin plastics, apply only a thin layer (risk of deformation). Do not wipe off excess glue but remove it once dry. Store in a dry environment.

An UHU special hard plastic glue - 30g - 34115
Delivered in its original packaging