UHU Power Glue Gel tube - 3g - 36725

The UHU Power Glue 36725 is very practical and applies easily to all types of surfaces. Very strong, the glue remains elastic even after drying. Its gel formulation provides precise application for a clean and drip-free finish.

• An essential for repairing and bonding strongly and quickly
• Extra strong and extremely durable
• Instant glue that guarantees a powerful, quick, and lasting bond
• Non-drip gel formula
• Ideal for vertical application
• Universal glue that adapts perfectly to all porous surfaces
• Resistant to temperatures between -4 °C and +8 °C
• Water-resistant, even in the dishwasher!
• Initial grip in 1-6 seconds and final grip in 24 hours

• Drying time: approximately 20 to 120 seconds for open time and about 12 hours for final strength
• Moisture resistance: Good
• Temperature resistance: from -40 °C to +80 °C
• Chemical resistance: Good
• Filling power: Limited
• Base raw material: Cyanoacrylate
• Colour: Transparent
• Viscosity: approx. Liquid
• Density: approx. 1.03 g/cm3

The surfaces to be bonded must be dry and free from dust and grease

1. To pierce the seal, firmly twist the cap clockwise on the tube. Tip: do not press on the tube while piercing
2. Unscrew the cap to reveal the applicator
3. Using the nozzle, apply the glue directly from the tube as finely as possible on one of the surfaces (too much glue significantly slows down the drying process!)
4. Immediately press the pieces together
5. After use, clean the nozzle with a dry paper towel and close the tube by replacing the cap

A UHU Power Glue Gel tube - 3g - 36725
Delivered in its original packaging