Anti-static agent Car system E1 500ml

An Antistatic Agent Car system E1 500ml that allows for a polarity inversion, thus resolving painting finish issues such as dust, joint differences, shade variations of the substrate, etc. This product eliminates static electricity for an extended period on surfaces to be painted, such as plastics, ABS, PVC, steel, galvanised metal, aluminium, stainless steel, brass, glass, ceramics, or old paints.

This product is silicone-free, compatible with all systems, and biodegradable by more than 94%.

• Protection of individuals: In case of splashes on the skin and face, wash thoroughly with water.
• Soiled packaging must be completely emptied. After cleaning with an appropriate detergent, they can be reused. Unused product is disposed of by incineration at an approved facility. The packaging can be disposed of as non-hazardous waste under the full responsibility of the waste holder. Do not dispose of residues in sewers and watercourses.
• In case of ingestion, do not induce vomiting; consult a doctor immediately and show them the packaging or label. Contact the nearest poison control centre. France: 01 45 42 59 59 / 03 83 32 36 36 Belgium +32 70 245 245 Europe: 112
• Prevention: Wash thoroughly with soap and water after handling. Wear protective gloves / protective clothing / eye / face protection equipment. Avoid release into the environment.
• In case of eye contact: rinse carefully with water for several minutes. Remove contact lenses if the victim is wearing them and if they can be easily removed. Continue rinsing. If eye irritation persists.
• Disposal: Dispose of the contents / container in accordance with local / national / international regulations. Expiry date: 2 years (after manufacture).
• Product reserved for professional use. Read the instructions above before use. Safety Data Sheet available on request.

• Antistatic Agent Car system E1 500ml
• Volume: 500ml
• Composition: Aqueous solution of AQ alkyl compounds in C8-18 benzyldimethyl chlorides - CAS No. 63449-41-2 / concentration: 20g/L. Causes skin irritation. Causes serious eye irritation. Harmful to aquatic organisms, may cause long-term adverse effects.
• Usage: This product is ready to use. To mix the product well, it is advisable to shake the can vigorously. Apply the antistatic agent using the sprayer and then wipe with a dry, lint-free cloth.
• Degrease with a silicone-free product and then wipe with a dry cloth. You can then apply the paint. Caution: this product cannot in any case replace silicone cleaners.

An Antistatic Agent Car system E1 500ml
Delivered in its original packaging