SIKA Treatment and Protection Pack - Sikagard-120 Stop Green 5L - Sikagard-221 Facade Protector 5L

SIKA Treatment and Protection Pack - Sikagard-120 Stop Green 5L - Sikagard-221 Facade Protector 5L to effectively eliminate green stains, prevent their reappearance, and waterproof your surfaces. The SIKA algicide and fungicide treatment - Sikagard-120 Stop Green - 5L is ready to use and effectively removes green stains while preventing their reappearance on roofs, facades, and floors. The application is quick, simple, and leaves no marks on materials for a healthy and clean home in one easy step. The SIKA water repellent - Sikagard-221 Facade Protector - 5L prevents water infiltration into uncracked masonry, concrete, and mortar facades. The substrate still breathes, and the protection is completely invisible, allowing the material to retain its shape and natural colours.

Specialising in chemical products, Sika is a leader in the development and manufacturing of systems and products for bonding, sealing, sound insulation, reinforcement, and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now!

Sikagard-120 Stop Green

• Applicable horizontally or vertically
• Easy application with no rinsing required
• Applicable on all substrates: slate, shingle, stone, brick, concrete, mortar, fibre-cement, plaster, tiles, polyester, zinc, painted surfaces
• Leaves no marks on materials
• Preventive effect
• Can be painted or covered with a coating once the green stains are removed
• On painted surfaces, conduct a preliminary test and wait at least 72 hours to assess the result (check that the paint is not discoloured)
• Read the instructions carefully before use

Sikagard-221 Facade Protector

• Elimination of the effects of porosity on masonry, concrete, and mortar facades
• Air permeability ensured: the substrate "breathes".
• Completely invisible protection
• Cleanliness of facades exposed to rain: water runoff on areas treated with Sikagard® Facade Protection facilitates the removal of dust, soot...
• Improvement of thermal insulation: a dry wall has a thermal insulation coefficient much higher than that of a damp wall.
• Reduction of moss and lichen adhesion...

Sikagard-120 Stop Green

• Density: approximately 1
• pH value: approximately 8
• In dry weather and without rain 48 hours after application. Do not apply in excessive heat on a substrate that is too hot
• Consumption: 1 litre for approximately 7 to 10 m²
• Colour: colourless
• Volume: 5 L
• Ref. 698412

Sikagard-221 Facade Protector

• Density: ≈ 1
• pH value: between 11.5 and 13
• Consumption: On mortar: from 0.15 L to 0.20 L/m² - On porous materials: a preliminary test is necessary
• Application temperature: from +5°C
• Colour: Colourless after drying
• Volume: 5 L
• Ref. 707020

SIKA Treatment and Protection Pack - Sikagard-120 Stop Green 5L - Sikagard-221 Facade Protector 5L
1x SIKA algicide and fungicide treatment - Sikagard-120 Stop Green - 5L
1x SIKA water repellent - Sikagard-221 Facade Protector - 5L
Delivered in their original packaging
Read the instructions carefully before use