SIKA kit exposed concrete 100m² Deactivator 20L - Colourless protection for floors 22L and 11L

SIKA Exposed Concrete Kit 100m² Release Agent 20L - Colourless Protection for Floors 22L and 11L the release agent is a concrete stripper that leaves an aesthetic appearance of the “washed gravel” type with a deactivation depth of approximately 4 to 6 mm. To be used on concrete with aggregates between 12 and 20 mm. Deactivating concrete reduces the risk of slipping. The protection included in the pack provides an aesthetic and uniform finish with a wet or satin appearance depending on the application. The product is resistant, does not yellow over time, and does not deteriorate.

Specialising in chemical products, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement, and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now!

• Aesthetic appearance of the “washed gravel” type
• For concrete with aggregates between 12 and 20 mm
• Aesthetic and uniform finish
• Slip resistance
• Protection of surfaces from aggressive atmospheric agents and carbon dioxide
• Revives colours
• Improves stain resistance (oil, grease...)
• Facilitates maintenance and cleaning
• Helps limit the proliferation of vegetation
• Compatible with SikaTop® and Sika Monotop® repair mortars
  
  

Surface Release Agent

• Density: ≈ 1
• Deactivation depth: ≈ 4 to 6 mm
• pH value: ≈ 4.0 ± 1.0
• Application temperature: +5°C minimum to +35°C maximum.
• Consumption: 4 to 5 m² per litre
• Liquid colour: White
• 20L canister

Sikagard Protection

• Density: ≈ 0.9
• Application temperature: +5°C to +30°C
• Drying time: (drying must be protected from rain) Dust-free: 30 minutes at 20°C / Complete drying: 24 hours at 20°C
• Consumption: (depending on the porosity of the surfaces):
  • Mortar-based surface: 2 coats of approximately 100 to 150 g/m² per coat
  • Very closed surfaces: a single coat of 100 to 150 g/m² is sufficient.
• Application in hot weather or on hot surfaces may lead to increased consumption.
• 22 L and 11 L buckets
  
  

1x SIKA Surface Release Agent 20L
1x SIKA Colourless Floor Protection 22L
1x SIKA Colourless Floor Protection 11L
Delivered in its original packaging
Read the instructions carefully before use