SIKA exposed aggregate kit 25m² - Surface protector 20kg - Retarder 5L - Colourless protection for floors 11L

SIKA Exposed Concrete Kit 25m² - Surface Protector 20kg - Retarder 5L - Colourless Floor Protection 11L the surface protector can be used on any application surface (horizontal/vertical) and on all construction materials: concrete, stone, paving, wood, paint, coating, aluminium, glass, plastic. It does not alter the appearance of the treated materials and provides temporary protection against concrete and retarder splashes on surfaces near the work area. The retarder is a concrete stripper that leaves an aesthetic appearance of the “washed gravel” type with a deactivation depth of approximately 4 to 6 mm. To be used on concrete with aggregates between 12 and 20 mm. Deactivating concrete reduces the risk of slipping. Complete the work with the protection included in the pack, which allows for an aesthetic and uniform finish with a wet or satin appearance depending on the application. The product is resistant, does not yellow over time, and does not deteriorate.

Specialising in chemical products, Sika is a leader in the development and manufacturing of systems and products for bonding, sealing, soundproofing, reinforcement, and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the firm's priorities for over 100 years now!

• The protector can be used on all construction materials: stone, paving, wood, paint, coating, aluminium, glass, plastics, concrete
• Aesthetic appearance of the “washed gravel” type
• For concrete with aggregates between 12 and 20 mm
• Revives colours
• Improves stain resistance (oil, grease...)

Surface Protector

• Consumption: ≈ 200 to 300 g/m² depending on the nature of the substrate to be treated
• Product colour: Opalescent green
• Bucket of 20 kg

Surface Retarder

• Deactivation depth: ≈ 4 to 6 mm
• Consumption: 4 to 5 m² per litre
• Container of 5 L

Surface Protector

• Drying time: (drying must be protected from rain) Dust-free: 30 minutes at 20°C / Complete drying: 24 hours at 20°C
• Consumption: (depending on the porosity of the substrates):
  • Mortar-based substrate: 2 coats of approximately 100 to 150 g/m² per coat
  • Very dense substrates: a single coat of 100 to 150 g/m² is sufficient.
• Bucket of 11L

1x SikaCem Film Surface Protector 20kg
1x SikaCem Surface Retarder 5L
1x Colourless Floor Protection 11L
Delivered in their original packaging
Read the instructions carefully before use