SIKA anti-damp kit - InjectoCream 20m - Wall sealant 2L

This SIKA anti-damp kit - InjectoCream 5m - Imper wall 2L will allow you to control rising damp in both interior and exterior walls as well as treat your damp walls. Inject the InjectoCream product into your damp walls to form a barrier that blocks water and prevents the progression of moisture. Then apply the Imper wall product to treat your damp walls that are prone to peeling wallpaper or paint blistering. These products can be used on almost all types of masonry walls (brick walls, natural stone, hollow walls, buried walls, and rubble walls made of stone and random-shaped rubble).

Specialising in chemical products, Sika is a leader in the development and manufacturing of systems and products for bonding, sealing, soundproofing, reinforcing, and protecting in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now!

SikaMur InjectoCream Pro anti-damp Kit - 20m

• Ensures effective results thanks to its formula with 80% active ingredients
• Easy to use even for a novice
• Ready-to-use single-component product
• Quick application (no "double drilling", no need to wait for the liquid to penetrate under pressure or by gravity)
• No need to seal around the drill holes beforehand (unlike injection systems or gravity systems)
• Constant product consumption (easy calculation of the amount of product needed)
• Does not require a special and expensive injection pump
• Low risk aqueous phase – non-caustic, non-flammable – no pressure injection, no risk of splashing
• Very little product loss
• No risk of increased efflorescence (compared to siliconate-based treatments)
• Kit includes: 5 cartridges of 600 ml and 1 adapter, 1 gun with 2 nozzles

Imper wall Resin 2L

• Forms an impermeable barrier after drying that prevents the formation of mould and efflorescence
• Low viscosity penetrates deeply into the substrate
• Almost invisible after drying
• Can be covered with paints and wallpapers

SikaMur InjectoCream Pro anti-damp Kit - 20m

• Density: 0.9 (at 20 °C)
• Application temperature: at +5°C during and at least 48 hours after application
• Colour: White
• 5m kit: includes 3 cartridges of 300 ml and 1 gun with 3 nozzles
• Reference: 411150-1308

Imper wall Resin 2L

• Density: 1
• pH value: approximately 7.5
• Colour: colourless white after drying
• Substrate temperature: between +5°C and +30°C
• Consumption: from 200 to 300 g/m² depending on the porosity of the substrate.

1x SikaMur InjectoCream Pro anti-damp Kit 20m
1x Imper wall Resin 2L
Delivered in their original packaging
Read the instructions carefully before use