Colourless protection for floors SIKA Sikagard 681 Protection - 3L

The colourless floor protection SIKA Sikagard 681 Protection - 3L provides an aesthetic and uniform finish with a wet or satin appearance depending on the application. The product is resistant, does not yellow over time, and does not deteriorate. It is a ready-to-use impregnation based on solvent-based acrylic derivatives.

Specialising in chemical products, Sika is a leader in the development and manufacturing of systems and products for bonding, sealing, soundproofing, reinforcement, and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now!

• Wet or satin appearance depending on the nature of the substrate and the amount applied
• Aesthetic and uniform finish
• Protects substrates from aggressive atmospheric agents and carbon dioxide
• Revives colours
• Improves stain resistance (oil, grease...)
• Facilitates maintenance and cleaning
• Helps limit the proliferation of vegetation
• Does not yellow over time
• Compatible with SikaTop® and Sika Monotop® repair mortars
• Ideal for exposed aggregate slabs, interlocking paving, aesthetic concrete, patterned slabs...

• Density: ≈0.9
• Application temperature: +5°C to +30°C
• Drying time: (drying must be protected from rain) Dust-free: 30 minutes at 20°C / Complete drying: 24 hours at 20°C
• Consumption: (depending on the porosity of the substrates):
• • Mortar-based substrate: 2 coats of approximately 100 to 150 g/m2 per coat
  • Very closed substrates: a single coat of 100 to 150 g/m2 is sufficient.
• Application in hot weather or on hot substrates may lead to increased consumption.
• 3L bucket (for approximately 9 to 13.5 m2 in 2 coats)
• Colour: Colourless with a wet effect after drying
• Ref. 1450

A colourless floor protection SIKA Sikagard 681 Protection - 3L
Delivered in its original packaging
Read the instructions carefully before use