SADER neoprene contact glue - Immediate grip - 55ml

This SADER neoprene contact gel adhesive - Immediate setting - 55ml is an adhesive that allows for the assembly of most materials on all surfaces both indoors and outdoors (under shelter): wood and laminate, rubber, leather and faux leather, cork, rigid plastic on flat surfaces only, and metal. Not suitable for polyethylene (PE), polypropylene (PP), and expanded or extruded polystyrene. Its gel texture makes this product very practical for use on vertical surfaces as well as on surfaces with high absorbency.

The surfaces to be assembled must be clean, dry, dust-free, and degreased. Smooth surfaces should be roughened by sanding with sandpaper.

• Apply the adhesive in a thin and even layer on both surfaces using a brush
• Allow the solvents to evaporate
• Wait 10 minutes before assembling
• As soon as the adhesive is no longer sticky to the touch, assemble by pressing firmly
• WARNING: Position the materials correctly for assembly as the immediate setting does not allow for any adjustment

• Suitable for indoor and outdoor use under shelter
• Does not run
• Immediate and permanent setting
• High heat resistance up to 110°C
• Moisture resistance

• Consistency: gel
• Use indoors and outdoors (under shelter)
• Waiting time before assembly depending on temperature:
• • 10 min. at +20°C
  • 20 min. at +15°C
• Consumption: 150 ml / m² on each side depending on the surfaces
• Volume: 55 ml
• Ref. 30021284

A SADER neoprene contact gel adhesive - Immediate setting - 55ml
Delivered in its original packaging