Résine-Net
Charge 404 High Density - Maximises Adhesion Strength for Equipment Bonding - WEST SYSTEM
High density filler to maximize bond strength for equipment and hardware bonding or wherever high cyclic loads are expected Epoxy thickener additive for bonding applications. When mixed with epoxy, it is an excellent filler for gaps or structural fillets. Can also be used to create filleted joints and fill voids Color: off-white
€17.03
Charge 405 Mixture for Holiday - Partition Fixing on the Sides of the Shell
The filler 405 is composed of cellulosic fibres and other fillers used for fillet formation when a natural finish is desired. A water-based or alcohol-based stain can be added to change the colour. Colour: light brown
€15.47
Charge 406 Thickening - General Use Adhesive
The 406 filler is a general-purpose thickening filler used for bonding, void filling and fillet seal. Use on vertical surfaces (does not run) Color: off-white Article on the use of the 406 filler
€14.38
Charge 407 Low Density - Profiling Putty Manufacturing - WEST SYSTEM
La charge de 407 est un enduit de carénage à base de microbilles. Une fois mélangé à l'époxy, celui-ci devient un mastic de profilage simple à poncer. Se mélange aux produits de la gamme WEST SYSTEM (G/flex, G/5...) Couleur : brun rouge foncé Article en anglais sur l'utilisation la charge The load of 407 is a fairing coating based on microbeads. Once mixed with the epoxy, it becomes a profiling putty simple to sand. Mixes with the products of the WEST SYSTEM range (G/flex, G/5 ...) Color: dark red brown Article in English on the use charge
€25.28
Charge 409 Filling and Fairing of Fibreglass - WEST SYSTEM
Based on hollow glass beads for lightweight coatings. For filling and fiberglassing on repairs.
€15.14
Charge 410 Low Density - for Light Profiling - WEST SYSTEM
Low density charge to have a light mix and easy to work. Suitable for profiling large areas. It is not recommended to use this charge under black paint or other surfaces subject to high temperatures. Articles on different uses of the 410 load (in English) Brown color Articles on different uses of the 410 load
€18.14
Cleaning Cream (250ML) - for WEST SYSTEM Resin
Cream to remove uncured epoxy from your skin Packaging: 250 ml
€16.70
Cleaning Solvent 850 (1L) - Removes Uncured Epoxy Residues - WEST SYSTEM
West system cleaning solvent 1 litre Cleaning solvent specially designed to remove uncured epoxy residues from tools, substrates and in the workshop. Also excellent for removing contamination from cured epoxy surfaces. Recommended equipment: - Disposable gloves. Ref: WS832-50 - Graduated mixing jar. Ref: WS805 - Reusable mixing sticks. Ref: WS804-25
€24.52
Cleaning Solvent 850B (2.5L) - Removes Uncured Epoxy Residues - WEST SYSTEM
West system cleaning solvent 2.5L Cleaning solvent specially designed to remove uncured epoxy residues from tools, substrates and in the workshop. Also excellent for removing contamination from cured epoxy surfaces. Recommended equipment: - Disposable gloves. Ref: WS832-50 - Graduated mixing jar. Ref: WS805 - Reusable mixing sticks. Ref: WS804-25
€55.42
Debubbling Roller Diameter 11CM
Rouleau débulleur pour enlever les bulles d'air de votre résine. Spiked roller to remove air bubbles from your resin.
€20.16
Debulking Roller 230MM Diameter 65MM for Roller Holder of 230MM Diam 8MM
Debubblizer roller, specially designed to eliminate all air bubbles present on your surface. Technical specifications: Material: Polypropylene Color: Blue and white Dimensions: Length: 230 mm Tip length: 12mm Diameter: 65 mm
€19.08
