UTILIPROTECT - Vehicle Floor Protection Resin

UtiliProtect Product Description

UtiliProtect is a 3-component resin specially designed for coating the floors of your vehicles.

It provides wear-resistant protection, anti-slip properties, and waterproofing.

This coating can be applied to a wide range of materials such as steel, aluminium, chipboard, etc. BUT DO NOT apply to bakelised wood floors!

Ideal Application and Storage Conditions

• Ambient temperature: 10°C to 35°C
• Substrate temperature: 10°C to 25°C
• Humidity: 75% maximum
• Storage: Store in unopened packaging at an ambient temperature of between 10°C and 25°C. 24 hours before applying the kit, it should be stored in the same work area as the floor so that the product and substrate have identical temperatures.
• Shelf life: 12 months

Packaging Available

• 2 to 2.5 m² kit: 8.3 kg (4.16 kg resin + 0.84 kg hardener + 3.3 kg of EPDM and quartz)
• 4 to 5 m² kit: 16.6 kg (8.32 kg resin + 1.68 kg hardener + 6.6 kg of EPDM and quartz)

Advantages

• Resistant protection: the coating protects against everyday wear and abrasion.
• Anti-slip: Ensures safety when transporting goods thanks to EPDM and quartz granules that reduce the risk of slipping.
• Waterproof: In the event of exposure to water or moisture, UtiliProtect will maintain optimum protection.

Consumption

• 8.3 kg kit covers between 2 and 2.5 m².
• 16.6 kg kit covers between 4 and 5 m².

Application Advice

1. As previously stated, it is advisable to store the kit in the same work area as the floor 24 hours before application.
2. Prepare the surfaces: they must be dry, free from dust, grease, oil, moisture, etc. Level the vehicle.
3. Pour the resin and hardener into a pot.
4. Mix for 2 to 3 minutes with an electric agitator at a speed of 400 rpm.
5. Add the EPDM and quartz granules, then continue mixing until a homogeneous mixture is obtained.
6. Pour the entire mixture onto the floor and leave to dry for 72 hours under optimum conditions for full use.

Technical Characteristics