Ultra-Thin Joint Filler - Width of 3.5MM - Teakdecking Systems

Product Description

Ultra-thin joint backing from Teakdecking Systems, 3.5 mm wide.

Recommendations

• We recommend joint backs for any groove depth equal to or greater than 8 mm, allowing the joint not to adhere to the bottom of the groove and to work face to face. This increases the flexibility and elongation of the joint.
• Adhesion on three sides limits the movement capacity of a joint before it breaks. That is why we recommend applying a joint backing at the base of each groove, so that the joint simply works on the edge of the slats and independently of the bottom of the groove.
• Make sure the rabbet is clean. A dirty rabbet can have negative consequences.

Additional Information

Teakdecking Systems ultra thin joint tape. For better adhesion, it is preferable that the joint works face to face. We recommend joint bottoms for any groove depth equal to or greater than 8 mm, allowing the joint to work face to face and not stick to the groove bottom. This increases the flexibility of the joint. For best results, it is recommended to use a gasket base in the rabbet before caulking. Make sure the rabbet is clean. A dirty rabbet can have negative consequences.