PUFLOORING
PUFLOORING is a two-component polyurethane resin that is self-levelling. Specifically designed for the protection and finishing of new and old floors. Usable indoors and outdoors and washable with a water jet.
Main uses:
- Ideal for garages,
- Industrial floors,
- Residences,
- Exhibition halls,
- Laboratories,
- Balconies...
Available colours:
beige (RAL1001), yellow (RAL1016), blue (RAL5015), light green (RAL6019), light grey (RAL7040), medium grey (RAL7042)
Packaging:
- 5 kg kit: 3.92 kg of component A + 1.08 kg of component B
- 10 kg kit: 7.85 kg of component A + 2.15 kg of component B
- 15 kg kit: 11.77 kg of component A + 3.23 kg of component B
- 20 kg kit: 15.68 kg of component A + 4.32 kg of component B
Key advantages:
- Waterproof,
- Easy to maintain, washable with a water jet,
- Continuous coating, seamless and shrink-free,
- Resistance to UV, wear, abrasion, acids, bases, oils, and diesel.
Consumption:
- For a self-levelling coating: notched squeegee 3x3x3 giving a thickness of 1 to 1.5 mm, or notched squeegee 5x5x5 giving a thickness of 2 to 2.5 mm.
- For a roller coating: 0.400 kg/m² per layer, with a 16-hour interval between each layer.
Technical characteristics:
Tests conducted from the mixture at an average temperature of 20°C.
| Mixing ratio by weight: | Comp. A: 7.85 / Comp. B: 2.15 |
| Theoretical density of the mixture: | 1.43 |
| Viscosity of the mixture: | 12,500 mPas ± 1,800 |
| Dry extract: | 99.75 % |
| Compressive strength: | 400 kg/cm² |
| Polymerisation after 24 H: | 37 shore D |
| Polymerisation after 6 days: | > 54 shore D |
| Pot life on a 1500 g sample: | Approx. 45 min |
| Open time spread: | 1 h 30 |
Preparation of the mixture:
- Ensure that surfaces are clean, dry, and free from dust, oil, or grease. The use of our primer POXYFIRST is highly recommended.
- Mix the resin and hardener, then mix for 2 to 3 minutes at a speed of 400 rpm with an electric mixer.
! Mix in small quantities to avoid an exothermic reaction due to overheating and rapid drying in the pot!
Application and storage conditions:
- Application temperature: 12°C to 35°C.
- Substrate temperature: 12°C to 25°C.
- Humidity level: must be less than or equal to 5% for concrete, and 8% for wood and agglomerates.
- Humidity: max. 75%.
- Storage: Keep in an intact package at room temperature between 15°C and 25°C.
- Shelf life: 12 months.
For more information, please refer to the technical data sheet. Water jet washable Recommended colour: beige (RAL1001), yellow (RAL1016), blue (RAL5015), light green (RAL6019), light grey (RAL7040), medium grey (RAL7042)
Main uses:
industrial flooring, garages, exhibition hall, laboratory, housing...
Consumption for a self-smoothing coating:
the application is made either with a notched squeegee 3x3x3 giving a thickness of 1 to 1.5 mm or with a squeegee 5x5x5 giving a thickness of 2 to 2.5 mm. 1.6 to 1.8 kg/m².
Consumption for a semi-smooth coating:
spread the mixture with a notched squeegee at a rate of 1.6 to 1.7 kg/m², remove the bubbles then sprinkle the quartz over the surface. After drying, trim and vacuum, then apply a sealing coat with a rubber squeegee. 0.5 to 0.7 kg/m². Uniform the whole with a polyester roller.
Consumption for a roller coating:
apply 2 coats at a temperature of 20°C at a rate of 0.400 kg/m² per coat, respecting an interval of 16 hours between each coat.
Substrate preparation:
Substrates must be dry, free of dust, grease, oil, moisture, curing agent, loose or crumbly parts and must not be subject to rising damp by capillary action. Possibility of using a PoxyFirst primer. Stripping is done by mechanical action (sanding, planing, shot-peening, diamond sanding).
Preparation of the mixture:
The components (Comp.A resin + Comp.B hardener) are delivered pre-dosed and should be mixed for 2.5 to 3 minutes at a speed of 400 rpm with an electric agitator fitted with a helical blade (right-handed pitch) with a diameter approximately 2.5 times smaller than the diameter of the seal.
